bhowle's Likes Received

http://i.imgur.com/hgmFpzf.jpg

http://i.imgur.com/hgmFpzf.jpg

You need this: NismoTronic - Nissan ECU Tuning and a wideband wired in to the Nismotronic ECU. John can help you set up a base tune and he also provides remote tuning services. With a bit of readin...

Glad I was able to help! I would also recommend recirculating the blow off valve somewhere between the turbo inlet and the MAF if you haven't already done so.

Your MAF is too close to the turbo. Turbulent air caused by the compressor blades is throwing off the reading. Well, it's a little more complicated than that, but there's the short answer. You need...

Found an updated link for the Z32 ecu tuning guide: ECU Tuning

Your MAF is too close to the turbo. Turbulent air caused by the compressor blades is throwing off the reading. Well, it's a little more complicated than that, but there's the short answer. You need...

The expansion valve is in the evaporator box behind the glove compartment.

The expansion valve is in the evaporator box behind the glove compartment.

Definitely replace the drier, I wouldn't bother with the expansion valve unless you are purchasing one from the dealer. Aftermarket ones never seem to work correctly. I'm also wary of the four seas...

Definitely replace the drier, I wouldn't bother with the expansion valve unless you are purchasing one from the dealer. Aftermarket ones never seem to work correctly. I'm also wary of the four seas...

I am running a 4-2-1 header built by Charles. (Originally on Joe's Panda). Full merge, 2.5" collector. TQ peak is around 6500rpm (previous SSAC was around 5500). Currently on a 9.5:1 highport DE wi...

You're welcome! I have purchased and installed 5 or 6 racks from them, including one that's currently in my P10. Zero issues, super fast shipping and core refunds.

I use RackDoctor, they're local to me and do great work. $120 for a SE-R rack. Nissan Sentra Rack And Pinion

Is it overheating according to the gauge or the actual ECU temp sensor reading? When does it overheat? At idle? While driving? During/after a pull under boost? Cooling system bled and burped properly?

I am running a 4-2-1 header built by Charles. (Originally on Joe's Panda). Full merge, 2.5" collector. TQ peak is around 6500rpm (previous SSAC was around 5500). Currently on a 9.5:1 highport DE wi...

I am running a 4-2-1 header built by Charles. (Originally on Joe's Panda). Full merge, 2.5" collector. TQ peak is around 6500rpm (previous SSAC was around 5500). Currently on a 9.5:1 highport DE wi...

I am well aware of how much time, effort and money goes in to organizing a successful track day. I also realize that it is not financially feasible for this group to rent a track outright. Perhaps ...

Yes, it is. There's little difference between a multi-day track event and the SR20 convention.

People are bitching because the organizers failed to secure a road course for the second year in a row. Last year was understandable, but it seems that this year was due to lack of funding and ques...

People are bitching because the organizers failed to secure a road course for the second year in a row. Last year was understandable, but it seems that this year was due to lack of funding and ques...

Yes, it is. There's little difference between a multi-day track event and the SR20 convention.

I am well aware of how much time, effort and money goes in to organizing a successful track day. I also realize that it is not financially feasible for this group to rent a track outright. Perhaps ...

I am well aware of how much time, effort and money goes in to organizing a successful track day. I also realize that it is not financially feasible for this group to rent a track outright. Perhaps ...

People are bitching because the organizers failed to secure a road course for the second year in a row. Last year was understandable, but it seems that this year was due to lack of funding and ques...