All posts made by Y2KG20 that members have liked.
I have a mega and the same lcd shield sitting here. Can't wait for the code, I have 2 different OEM freq based sensors I want to test with this.
I know from personal experience on my 6 speed car when it had the GTX/DE combo if you have it at 6500 rpm in 4th gear and shift to 3rd instead of 5th it will throw a rocker :)
[url= URL=https://en.wikipedia.org/wiki/Nissan_Sylphy]https://en.wikipedia.org/wiki/Nissan_Sylphy[/url]
For people like me that have no idea the car existed :)
I thought it was a variant of the...
[url= URL=https://en.wikipedia.org/wiki/Nissan_Sylphy]https://en.wikipedia.org/wiki/Nissan_Sylphy[/url]
For people like me that have no idea the car existed :)
I thought it was a variant of the...
The "A" transmission hard parts are identical to the "B" parts. We actually used a B braking drum in my buddies "A" since all three a's were bad. I haven't tried it yet but if you changed the front...
On the cracked ringlands we were running a GTX3071R tial vband .64 and 24psi. We are just going to run E85 to be safe on the next one and if we use the sprayer again we will just use it for water c...
They are actually pretty thick compared to some pistons. With ethanol I don't think there would be any problems at all. On meth just don't run out, we did that once already and cracked ringlands......
It didn't even get to pick'n'pull before someone got the headlights and front bumper cover :(
It didn't even get to pick'n'pull before someone got the headlights and front bumper cover :(
Pulled the VET solenoid off. It is the same as the P12 NA solenoid. When I put pressure on the feed and hook power to the solenoid it opens both IN and EX cam holes. Also note that my IN and EX mar...
Just hit 14,000 miles on the rebuilt RE4F03B, and all those miles are at 14psi. Also have 1k on the new motor now. The car has never run better. Depending on the street temperature it can hardly ke...
Just hit 14,000 miles on the rebuilt RE4F03B, and all those miles are at 14psi. Also have 1k on the new motor now. The car has never run better. Depending on the street temperature it can hardly ke...
My brothers JV0 G20 got T-boned and was totaled. Wasn't his fault and the lady's insurance said that they would give him book value (somewhere around $1000) We just finished building the car new av...
If you do the head I would also suggest using the high volume VE oil pump and matching balancer. Only the P11 VE cams are going to work on DE/RR bottom end swaps. If you want N1 cams you will need ...
If you do the head I would also suggest using the high volume VE oil pump and matching balancer. Only the P11 VE cams are going to work on DE/RR bottom end swaps. If you want N1 cams you will need ...
Depends on the dyno type. But usually whatever gear is closest to 1:1 ratio will give you the most accurate results.
I know from personal experience on my 6 speed car when it had the GTX/DE combo if you have it at 6500 rpm in 4th gear and shift to 3rd instead of 5th it will throw a rocker :)
Ve pistons and rods are like RR piston and rods. VET piston and rods are like GTIR pistons and rods. Pretty big difference. Another thing would be VE engine block has DE axle carrier bracket where ...
Ve pistons and rods are like RR piston and rods. VET piston and rods are like GTIR pistons and rods. Pretty big difference. Another thing would be VE engine block has DE axle carrier bracket where ...
Ve pistons and rods are like RR piston and rods. VET piston and rods are like GTIR pistons and rods. Pretty big difference. Another thing would be VE engine block has DE axle carrier bracket where ...
If someone changed pistons and the main bearings looked like that I wouldn't feel safe about the motor at all. I wouldn't use it until everything was cleaned out and clearance checked. It's just no...
Like Jimbo said, check the tank. I saw one member on here that had one of the most sludged up tanks I have ever seen. If that's the case it's just going to clog up again.
Like Jimbo said, check the tank. I saw one member on here that had one of the most sludged up tanks I have ever seen. If that's the case it's just going to clog up again.
Like Jimbo said, check the tank. I saw one member on here that had one of the most sludged up tanks I have ever seen. If that's the case it's just going to clog up again.
Thanks! Yeah the redline on the RR cars suck for NA but works out well on a boosted auto. Good luck on your unicorn hunt :)