Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

ga16eats's Likes Given

All posts liked by ga16eats

ga16eats's Likes Given
- All posts liked by ga16eats
Posts: 1-25 of 557
Thread Title / Post Title / Post Preview
Posted By / Posted At
Forum Section
Thread: RE4F03B Automatic with shift kit and Turbo = Success!
Post: I know from personal experience on my 6 speed car when it...
I know from personal experience on my 6 speed car when it had the GTX/DE combo if you have it at 6500 rpm in 4th gear and shift to 3rd instead of 5th it will throw a rocker :)
2016-06-05 16:02
Thread: Sr16de
Post: The real motor to build is a 13 to 1 compression 92mm ...
The real motor to build is a

13 to 1 compression 92mm piston bore with 68.7mm SR16VE crank. This would give you a 1.827 L motor

You build that with a ported head, N1 cams and shimless valves ...
2016-09-14 11:34
Thread: CSK, front housing in rear, too short?
Post: Yes, I agree with that. But my point above on total heig...
Yes, I agree with that. But my point above on total height was, imagine you didn't have a spring on the strut. It really couldn't be any taller than it is now, right? With the insert placed in t...
2016-09-11 03:24
Thread: CSK, front housing in rear, too short?
Post: The whole running the front strut housing in the rears ar...
The whole running the front strut housing in the rears are for coilovers not ots springs. There isnt a option for rear koni on ots springs.
Keo
2016-09-11 01:31
Thread: Part 2. I think I'm doing it right this time.
Post: Thanks man, heard amazing things about these, hopefully I...
Thanks man, heard amazing things about these, hopefully I get to put them in use before winter
2016-09-10 03:22
Thread: Part 2. I think I'm doing it right this time.
Post: I'm trying to make it where we all get our builds going. ...
I'm trying to make it where we all get our builds going. Next update should be this finally sitting on the wheels
2016-09-09 15:23
Thread: Sr16de
Post: But who would rather a B cup over a [url= URL=http://4.bp...
But who would rather a B cup over a [url= URL=http://4.bp.blogspot.com/-RHBjo-q_MMU/TV6ShzOJpMI/AAAAAAAAKCM/Z-WjKhUbcbk/s1600/sarah+mcdowd+%252810%2529.jpg]C[/url] cup anyway
2011-08-02 15:36
Thread: Sr16de
Post: People do other types of driving then drag racing i heard.
People do other types of driving then drag racing i heard.
2011-08-01 23:31
2016-09-08 18:57
2016-09-08 04:54
Thread: VVL and E85
Post: big injectors NA is not a problem. I'm running ID1000 on...
big injectors NA is not a problem. I'm running ID1000 on 91 gas with zero idle or startup issues whatsoever.
2016-09-07 18:48
Thread: Different dip stick length
Post: Left is DET.
Left is DET.
2011-08-29 16:15
Thread: My SR20/KA24 Engine Run Stand
Post: Pretty dang neat. Much easier to work on stuff on that ca...
Pretty dang neat. Much easier to work on stuff on that cart than anything else, even an easy to work on S-chassis, this is even easier. How long did that take you to assemble? And any teething iss...
2016-09-05 17:22
Thread: T25 with T28 internals
Post: I have a T28 and a T25 at my disposal. Maybe I'll do a li...
I have a T28 and a T25 at my disposal. Maybe I'll do a little experiment... Can't imagine this is new ground though. And I'm not one to divert precious time from completing my car to messing around...
2008-12-19 00:44
Thread: b13 radiator upgrade
Post: What's your set up? I had a boosted B14 making 230whp tha...
What's your set up? I had a boosted B14 making 230whp that car never ran hot with the factory 2.0 radiator...... I would first check all your components involved with cooling make sure their workin...
2012-07-09 05:59
Thread: b13 radiator upgrade
Post: Z32 radiator cap. Higher pressure cap. NX2K radiator....
Z32 radiator cap. Higher pressure cap.

NX2K radiator. Twice as thick as the SE-R.

GTiR radiator. Twice as thick as the SE-R, more fins per square inch than the NX2K.

Mishimoto radiator....
2012-07-09 16:30
Thread: Recommendations for loud, non-girly car horn.
Post: Recommendations for loud, non-girly car horn.
Recommendations for loud, non-girly car horn.
2011-02-22 22:07
Thread: T28 vs t571z
Post: Yeah, i'm just trying to figure out if its worth using ov...
Yeah, i'm just trying to figure out if its worth using over the T28, or just not getting it and waiting for something better. I hear its 350hp capable fairly easy. But not sure it likes to go above...
2016-08-30 02:41
Thread: wtt: 3 inch vrs exhaust
Post: Make sure you get some earplugs :)
Make sure you get some earplugs :)
2016-08-27 01:26
Thread: B13 Progress rear bar install
Post: B13 Progress rear bar install
B13 Progress rear bar install
2016-05-27 01:35
Thread: B13 Koni options
Post: B13 Koni options
B13 Koni options
2016-02-25 20:00
2016-08-25 16:54
Thread: B13, front struts w/Koni in rear, stabilizer bracket?
Post: Probably just like the way Progresss, ST and others mount...
Probably just like the way Progresss, ST and others mount the rear sway...

maybe?

http://i6.photobucket.com/albums/y205/NissanEgg/1994%20Nissan%20Sentra%20LE/Photo04121843_zpsd8c503c2.jpg
2016-08-24 15:55
Thread: Intake air temps before and after intercooler.
Post: Honestly Jay, my temps just before the throttle body are ...
Honestly Jay, my temps just before the throttle body are usually around ambient unless in stop n go traffic.. don't read too far into what some people say especially sr20det_b14 he's as bad as stor...
2016-08-03 22:28
Thread: Intake air temps before and after intercooler.
Post: Intake air temps before and after intercooler.
Intake air temps before and after intercooler.
2016-07-26 04:44
Icon Legend and Forum Information
Contains unread posts
Contains no unread posts
Thread is closed
You have posted in this thread
Users Browsing this Forum
There are currently ? users browsing this forum. (? members & ? guests)
StubUserName

Back to top