All posts liked by squirlz
Thank you for the kind words! I am glad you are enjoying the product and using it's capabilities!
If you are using the ADC input for a 0-5 volt flex input, then you don't need the V2 adc board.
...
Some thoughts regarding SR16VE pistons on other SRs
Ok header and down pipe is finally complete. Just have to send the header for ceramic coating now.
It's by no means perfect but it's pretty decent to me, especially since I've never tried some...
Sorry for the silence and waste of thread count. Mum just expired, I wasnt feeling up to par for a while. Now I am not either, but I am back at work (away from family and alone) so instead of allow...
NismoTronicSA - NEMU2 Updates
Dont bother with oil additives, regular oil changes ftw :)
The chain does not skip teeth on SR20's, but it can be noisy. There is an upper chain guard under the valve cover that likes to scrape ...
This .tcd is from the above mentioned folder, should be perfect as a starting point
"SR20VE (330 B13).tcd"
[ATTACH]824[/ATTACH]
-SR20VE
-330cc inj
-B13 maf
Update on the car formerly owned by BORNGEARHEAD...
Same dyno, same tuner (squirlz)
Changes = Nismotronic SA ECU instead of Calum Realtime, and new tune
sr20ve
N1 cams w/springs & titanium re...
I too removed the oem water temp and used the stock location. Pretty sure I had to use an adapter for the threads or retap it.
Oil temp yes in the sump. The theory I went by is that you want to ...
My setup makes only 10whp more than yours and what makes the difference its the longer CAI without the long 3.5in CAI makes the same ;) Leave the header alone It wont make much more at this point i...
How To: Home Made Smoke "Machine" for Vac Leaks
2014 SR20 National Convention Itinerary
All you need is a rag.
https://www.youtube.com/watch?v=jqv8A2jakOg
C
I understand what you guys are saying but this is the level where I tell guys they need to have the stomach for the N/A game with the SR20. Yeah, you can make a cheap 190-200whp VE setup with a 100...
My vote, part out motor and put that RR back in.
NismoTronic 3.10.002 Update: Launch control switch | ADC Inputs | TCD Compare
I have done this with Marvel Mystery oil. A few ounces in each cyl.
In fact I have a VE in storage like this now.
Well gang the hotel has been officially booked. Once the contract is written up I will release all the info!!!
Next thing to book is the drag day!
After over ten years of dating, I finally got my shit together enough to get Katie an engagement ring. I asked her to marry me over the holidays and she said yes! :D
The plan has been for a long w...
NismoTronic 3.9.003 Update: IAT and Injector Latency Presets AND Logging Status
The NismotronicSA documentation is a reference that explains how the systems work and the parameters and tables used to tune all aspects of engine operation. It is not a general engine tuning docum...
Good work.
If you need any help testing let me know. You are more than welcome to use the dyno here for a compare again the SSAC etc.
I dont mind lending a hand.
all i have to say is that this was a super budget setup, im not looking for crazy power or anything, it was just a favor for a very very good friend of mine. hes happy with it and so am i. if i wan...