All posts liked by vqman
Get a multimeter and check (with batery positive removed) the orange wire on the maf for short circuit to ground. You may have melted the insulation on this wire when the original mistake was made.
Thanks, i was using good formula, but measuring wrong base circle... my bad. :)
tallest lobe height minus shortest lobe height x 1.6 = lift
Here's a similar idea, its all 240s but maybe can help with the development.
http://www.hardtunedstore.com/wp-content/uploads/2014/03/hoodie-silvia.jpg
http://www.hardtunedstore.com/wp-content/...
I need your help my friends.
Whole lot of talking in this thread...Not sure how you guys up north handle things but in texas we roll 4 deep go collect or pay the consequences.
A few days ago when someone mentioned that he was an admin on one of the forty two SR20 FB groups, I took a look, and sure as shit there he was, listed as an Admin. Figured I'd take another look to...
He was made aware of this thread again today. No question about it.
I wasn't going to jump in this thread but seeing the trend I thought I would throw in my feedback as well. Last year I was selling a VE head:
http://www.sr20-forum.com/naturally-aspirated/70404...
Its not only that he's terrible at actually gettin the package out, but his communication sucks an he treats people like shit..
If I have affected Mr. Justin Chapnutz so much as to change his user title to say "fuck you @ kyle" and for him to send me PM and that he absolutely cannot wait to see me in ohio, I guess I am doin...
No you don't. (Says the Puerto Rican that has traveled to and shipped from all around the states back to my house in PR, I have received hundreds of items of all sizes and shapes at my house in Pue...
If only we had a moderation staff who would at least stop the bullshit from happening on this forum......
If only we had a User Feedback section and iTrader rating plugin where someone could research a seller before deciding to buy from them...
every time i see someone say they are doing business with this clown i just laugh.. something shoulda been done about him a long time ago.
I dint have same luck!!
Opened a paypal claim I know its just $42 for a set of valves but hey!!!
If you dont have time to ship them DONT OFFER THEM!!!!
Or tell buyer otherwise and refund the mo...
They used the Gen V as a base, took Kojima's suggestion regarding primary and secondary sizing and pumped them out. No R&D required.
Picture time!
https://www.dropbox.com/s/gjgw7a410rhbf1q/20140902_131625.jpg?dl=1
https://www.dropbox.com/s/f4ohk96hsl1usvk/20140902_131611.jpg?dl=1
https://www.dropbox.com/s/1rk9nu13lxnkvcv/20...
180 WHP was done on Kentucky's intake manifold with N1 cams and a tune to make the car safe and drive-able to the Ohio Convention. Then Jamie tuned it, cleaned it up and that is the difference betw...
Got some numbers on one of mine finally.
[url= URL=http://s71.photobucket.com/user/nsusammyeb/media/imagejpg1_zps67b73ec3.jpg.html][img]http://i71.photobucket.com/albums/i147/nsusammyeb/imagej...
Finally got this welded up.
http://i129.photobucket.com/albums/p232/daleberridge1/Mobile%20Uploads/2014-07-21214129.jpg
Center feed manifolds are better at evenly distributing the air to each runner. For example look at this flow test simulation.
http://josephrinek.com/Manifold%20Pics/D%20FT%2020%20flow.JPG
C...
So this isn't a "chassis stiffening" mod, it's a "get it back into spec" mod? I'd be curious to see before mod an after mod alignment readings. Perhaps centering the bolts isn't necessarily giving ...
LOL @ "rust removal" in the next 14 days. lol
Fuckit lets just get together buy Nelson Ledges and call it SR20 Heaven. I will move to Ohio and Run it!!:shoot:
Build a dragstrip next to it called the DEEPstrip:rofl:
Seriously,this is really tr...
Hey man don't sweat it family comes first- make that your #1 priority, you have a good crew around you and I'm sure others will gladly step in. They are just cars after all. Be there for your wif...