All posts liked by DaveM
If you use the mls gasket be sure to get everything super clean.. the ve/vet gaskets work fine as the only difference is 1 additional hole that neither your head or block have so it don't matter
What i like to do on any oem crank pulley that has rubber in it is to make a white paint line from outer portion to inner portion to provide a quick visual inspection if the outer portion of the pu...
Sounds like a torn crankshaft pulley to me.
Yep sounds like the pulley has slipped
I would agree. Regardless of cam timing (the chain), the pulley is keyed to the crank, so the pulley should always read correctly with what the pistons are doing.
I had a pulley separate, so I'd...
If you do, grab the drivers axle with it. The passenger axle is the same, but drivers side must match the transmission (lsd/non). :cool:
Dope. I just was in the presence of John having him tune another car of mine. Smiles all around. He makes the cars so much more enjoyable, it is insane. I have John to thank for the cars that I hav...
They added cooling fins to the 98-99s, but otherwise it's the same old thing. This post has some good pictures of a 98:
SR20 Forum - View Single Post - B14 Sentra SE Project
Here's a nice com...
A revised exterior transmission case did grace these cars in the later cycle. The case was redesigned with the NZR n15 pulsar came out with the SR16VE engine. It is quite possible that the later US...
Just Finished Stuffing My P11 with 9" Wide Wheels
What Did You Do To Your B13 Today?
Raced at VIR again this weekend and ran some of my best lap times and came away with 2 class wins!
http://i27.photobucket.com/albums/c175/autoxse-r/20170506_170710.jpg
Twinscroll + Dual Plenum intake manifold + vertical flow sr20det ***photos***
Thank you! Hopefully I can provide some fresh parts for you turbo guys. My brother, TurboFX, doesn't have much time to make stuff anymore.
What Did You Do To Your B13 Today?
Yesterday swapped out the quarter glasses with ones I got from Chris101.
[url= URL=http://s6.photobucket.com/user/NissanEgg/media/20170330_175701_zpsli8ys2dp.jpg.html][img]http://i6.photobucket.co...
I raced mine in the freezing temps and got a little sideways
http://i27.photobucket.com/albums/c175/autoxse-r/FB_IMG_1489402342318.jpg
Polished all of the surfaces from the body line upward. Turtle Wax Jet Black box from Wal-Mart.
http://i265.photobucket.com/albums/ii205/93nx2000/IMG_20161204_104753240_zps6aq2exgi.jpg
Black ...
After alot of murphy's law striking, and much frustration and dead time (injector/tps/wiring/battery/immobiliser/throttle body issues and power steering leaks, the intake is now on and working. run...
Last Friday, did an oil change. I think the last time was over a year :rofl::p, but of course, I don't driver her. And new coolant temp sensor. :bigthumbup:
http://i151.photobucket.com/albums/s1...
Worked on these over the weekend by prepping a few of the stabilizer bar parts for welding :)
http://turbofx.net/wp-content/uploads/2016/10/Shift-Linkage-Parts-Prepped-for-Welding.jpg