Mattick22's Likes Given

~450WHP is pushing the limits of the Walbro 255HP pump, but it is certainly still the go-to for most normal-power turbo builds. It fits just fine assuming you get the kit for our chassis.
For a bi...

http://www.sr20forum.com/gallery/data/500/20v_eccs_wiring_diagram.jpg

SR20VE 20V ECU Pinout.

1 --
2 O2 sensor heater control signal
3 --
4 --
5 --
6 --
7 --
8 --
9 VVL solenoid contro...

mine's still nice and stiff.

i have a hotshot intake and header laying around that id be willing to sell (someone is interested in the header at the moment though..i had a 98 sentra with the 1.6 in it and my setup was as follo...

Best GA modification - Turbo. Unfortunately you pretty much have to build your own "kit" these days, but leave motor stock, slap turbo on it with some injectors, MAF, and ecu and beat the shit out ...

It is now confirmed that the Primera 2.2L Diesel 6speed shifter works with the swap! Posted some pics in my thread
http://i.imgur.com/3RVG9qg.jpg

Not everyone is on Facebook, hence some may comment here if they choose.

Did not know Car and Driver issued in Japan. I wonder who writes it. It looks fucking awesome! I want that magazine over here. So much tech!

You almost put me in a PTSD seizure with the Japanese...

I LOL'd at the "bunch of fucking monkeys" for some reason. :)

1: Im pretty certain this is connected to #3
2: I believe this is connected to the water manifold under the intake (but you can delete the coolant running through the throttle if it makes things ea...

WEBINAR!!!!! Would be awesome.

If you have a multimeter, you can check for the ignition signal from the ecu to the transistor. Set the meter on ac and you should measure like 2.4-2.6 v or so. This is vrms so you won't see peak v...

^^ i used something like that in my Pulsar which has the same bolt pattern as the B chassis

http://i102.photobucket.com/albums/m109/charleekeo/Nissan/GTIR/0d6e3c3c.jpg

http://i102.photobucket.com...

I have images of how I routed the cables in my build thread. I kept the rubber surrounding the metal bracket too. It looks completely stock from the outside.

http://i926.photobucket.com/albums/ad1...

My pulsar gtir sr20ve-t build

...........Sooooo, is the news that will be revealed is that you will finally get a chance to punch Chappy in the nuts tomorrow? :D

Update time. :)

I've got Andrews parts in the black plastic container and all of my parts in the boxes.

http://i499.photobucket.com/albums/rr354/ShawnB1/Badger%20Turbo/shipping%20to%20ct%2000...

[url= URL=http://s117.photobucket.com/user/23vvl/media/IMG_1051_zpspclg8dwl.jpg.html][img]http://i117.photobucket.com/albums/o72/23vvl/IMG_1051_zpspclg8dwl.jpg[/img][/url]

[url= URL=http://s117....

Never mind

[url= URL=http://s117.photobucket.com/user/23vvl/media/IMG_1007_zpsv94mwysa.jpg.html][img]http://i117.photobucket.com/albums/o72/23vvl/IMG_1007_zpsv94mwysa.jpg[/img][/url]

Is there no front dog bone mount with this configuration?

Board is installed, wideband is wired to ecu, I'm running the startup that John recommended. Car is running great so time to make it better. I had a few small issues, or more of user error on the...

Well the Nemu board came in the mail today. Soldering the board in tomorrow, and going to run the startup calibration that John recommended for me. Wish me luck guys.

Yes, we will likely be putting together another class in the spring this year.

I will try to get things ironed out within the next month or so.

Koenigsegg's Camless Motor

I run a full service street rod shop in ohio. i have the capabilities to make/design anything you can think of. full fab shop, sheet metal shop, body shop, first class PPG endorsed paint shop.

...