All posts liked by JKTUNING
Big thanks to JKTUNING for getting me a replacement V1 ADC so quickly.
No longer corrupts tunes, car runs perfect again! :bigthumbup:
"Panasonic BR2330A" style battery ordered from ebay (shipping from moates was 16x the price of the battery!!)
I will update this thread when I get it.
ok, so now my ign on is illuminated and and the eccs relay (self-shut off) is grounding out on its own (pin #38 ignition switch is a shared wire). Turns out that the same wire that powers the injec...
One will be get color and sensor changing option, and few other layout coming.
https://scontent-vie1-1.xx.fbcdn.net/hphotos-xfp1/v/t1.0-9/12540858_1244070778943268_4367680789469257952_n.jpg?oh=9...
unijabnx2000 Unsure at the moment. When I get a chance to measure the b13 distributor and cap, I can adjust the design accordingly. Currently this cap is for the b14+ distributor. Chances are it wo...
IIRC the ecu connector is smaller. Only hurdle is the cam signal and the IACV since the 00+ uses as stepper motor. After that its an assload of wiring. Right now the Nemu is our best bang for our b...
I have sent you an email.
Looking forward to integrating an android unit to my car in 2016! Happy new year everyone!
Newest design. I have able to design out the current issue so I went back to the older configuration. Less crap to deal with. It now has a built in 3.5amp driver. There isn't an automotive inductio...
Worth its weight in gold. Sometimes he gets wordy but it helped old man and I a ton.
Engine Management: Advanced Tuning: Greg Banish: 9781932494426: Amazon.com: Books
hunting idle fix with nismotronic.
You can get one from anywhere! It's a standard Mini-A->USB cable if I remember correctly. EBay has these for <5$, or if you're in a hurry, just head over to any computer store. Digital cameras, pri...
So us V1'ers only need the new ADC input board and a firmware update to use the direct flex fuel sensor? This is nice, always surprised on how great this product is developing.
New 4 channel oscilloscope came arrived. Can finally start testing new design. So what happened is called a ground loop. Common in stereo systems for those that are familiar. Basically the current ...
Thank you Dave ! This schematic helped me out ! Now i have flat shift :bigthumbup: and i need to lern how to drive with that !
Rock solid boost control now, worked a treat with the GTIR ecu and GTIR base file.
Sorry for ma bad english , now is all clear, i simply misunderstand what John wrote in her post. Now i setup Ignition max retard to -(minus) 16 degree in Ignt Tab / Advance settings and AntiLag wo...
My engine simulator has already paid off. I was able to identify and error I made when printing one of the circuit boards. Just need to print out another one and build it to spec and continue testing
Here's what I configured in NEMU after permanent install:
http://i.imgur.com/8be8T0f.png
Right, so I'm adding 40% fuel at maximum voltage (E85). At the middle spectrum, 20% fuel is added. This is...
I got everything in the car. I have Daniel's code on two different gauges from work. For some reason the temp didn't seem to work right and it was probably because I deleted the HZ out for more dis...
I have a very exciting update for everyone.
I filled my tank up with ethanol a few days ago and this arduino unit is doing a great job. I wanted to wait a few days to update this thread so I ...
walbro pump time
[URL="http://i1334.photobucket.com/albums/w660/sss4me/IMG_0196_zpslfwxefeb.jpg"]http://i1334.photobucket.com/albums/w660/sss4me/IMG_0196_zpslfwxefeb.jpg[/URL]
for our aussie n15"...
TunerView App Testers Needed!