Siemens Deka #3105 Tune (850cc)
Hi guys!
Anyone tried this? I'm trying use this injectors, N62 maf setup but, with a bad "quick" aceleration response. This injectors are low impedance. I built a resistor pack with 10 ohm resistor + 2.4 (injectors) = 12.4 ohm. I revised this and is ok! I'm trying differents "latency" with diferents K values but the car still bad. The quick aceleration is my other cause, when i try put the acelerator very quick, the car "die" in the 10.0 area. I adjusted the fuel map but, with a little good results...
Anyone tried this? I'm trying use this injectors, N62 maf setup but, with a bad "quick" aceleration response. This injectors are low impedance. I built a resistor pack with 10 ohm resistor + 2.4 (injectors) = 12.4 ohm. I revised this and is ok! I'm trying differents "latency" with diferents K values but the car still bad. The quick aceleration is my other cause, when i try put the acelerator very quick, the car "die" in the 10.0 area. I adjusted the fuel map but, with a little good results...