Thread: ecu chip question

so i finnaly found my other set of chips....the original ones that came with my car(calumecu) with no rev limit

now for some reason...they wont work...and no they arnt in backwards, and they are in the sockets all the way...kinda weird this is in my nismotronic basic ecu....

why would they just not work anymore>?


its really faster with the other set that wont work....ghey

Did any of the pins bend when you took them out or put them back in?

How long did they sit out of an ECU and did they get knocked around at all?

The daughterboard isn't tied to any specific tune or anything, so you should be able to use any chip combination that you want as long as both chips are programmed with the same tune on both and installed correctly.

Static electricity can corrupt the program stored on the chip, or worse, damage the chip permanently.
Nismotronic is a program that runs on a PC for tuning, and has absolutely nothing to do with your chip problem.

Cheers,
Dave

yeah they are the same,this is why i wanted an extra set of chips to work with ,incase somthin happened to my originals,but the ecu you shipped me didnt have any.




im thinkiking it was static...has to be

I can forward you an extra set of chips if you would like. You are also welcome to send up the two that you have and I can see if I am able to pull the bin file off of them to transfer them over to the new set.

Send me a pm if if this is something you would want to do.

yeah i could send them tou you..i also have the bin on another computer....so ill have to get it unless you have a better bin to use..i thought lynch420 had a good bin too idk..

ill pm you