Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Feature Request

+ Reply To Thread
Posts: 1-6 of 6
2015-10-18 23:27:56
#1
Feature Request
Even though I didn't buy it yet. This would be a nice little feature. Would entice me even more to get this..

Depending on which load source you pick could you make ALL other tables that do not apply "grey out" or go dull and not let you adjust any of the properties. I am talking visually here and un editable. Even though it might be technically disabled on the code side of things it would help me and I'm sure others. Especially if you can adjust a table/scaler even though its not used because some people might think it is being used.

Would make things even easier i'd say in tuning it.

Now I know this cant be done if your using 2 load sources and switching back and forth.
2015-10-19 21:31:58
#2
Originally Posted by Haulin200sx
Even though I didn't buy it yet. This would be a nice little feature. Would entice me even more to get this..

Depending on which load source you pick could you make ALL other tables that do not apply "grey out" or go dull and not let you adjust any of the properties. I am talking visually here and un editable. Even though it might be technically disabled on the code side of things it would help me and I'm sure others. Especially if you can adjust a table/scaler even though its not used because some people might think it is being used.

Would make things even easier i'd say in tuning it.

Now I know this cant be done if your using 2 load sources and switching back and forth.


When reviewing the log and when logging in realtime, it will also put you on the table that is being used.

Even while logging or reviewing if you click on a set or alt table that isn't being used it will automatically force you back to the table that IS being used.
2015-10-19 22:21:07
#3
Sounds good. This is when plugged in only right? I'm just going through the demo now...
2015-10-26 16:51:34
#4
Originally Posted by Haulin200sx
Sounds good. This is when plugged in only right? I'm just going through the demo now...


The demo doesn't have the same feature set as the most current release.
2019-01-30 11:50:41
#5
I am not sure , But I was thinking of installing something like a turbo timer to allow power to the electric windows for X amount of time after ignition switches off. Is this a possible feature that could be incorporated?
2019-02-08 12:09:28
#6
Originally Posted by pedro666
I am not sure , But I was thinking of installing something like a turbo timer to allow power to the electric windows for X amount of time after ignition switches off. Is this a possible feature that could be incorporated?


Yes, it is possible, and was considered as a feature of the initial release. Due to the complexity and time required for implementation, we chose not to include it.

+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top