Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: NismoTronic 3.10.002 Update: Launch control switch | ADC Inputs | TCD Compare

+ Reply To Thread
Posts: 1-10 of 14
2014-02-11 19:03:58
#1
NismoTronic 3.10.002 Update: Launch control switch | ADC Inputs | TCD Compare
NismotronicSA Update: 3.10.002 now available

* Added a launch control switch input which includes the ADC inputs. This gives the user the ability to enable/disable the launch control using a switch or a button. This is handy for those who do NOT have a working speed sensor and still want to use launch control using a button or similar while launching.

* Added ADC inputs to clutch switch input

* Added min RPM for closed loop operation (allows closed loop to be turned off below a specified RPM).

* RealTime updates now include ALL tables and parameters (not just main fuel/ignition maps).

* New compare function with ability to quickly view the compared file in the main tune window and you can also import the selected compare item into your opened tune. To get to this window go to Tools -> Compare TCD

* Right click on tables/parameters when compare file is open and select "Compare" to view compare data

Toggle realtime updates


Launch control switched input


TCD compare functions
2014-02-11 19:05:03
#2
Word more goodies!
2014-02-11 21:30:31
#3
Nice!
2014-02-11 21:56:00
#4
The wonderful gift that keeps on giving!
2014-02-12 00:34:11
#5
Fuck ya!

Is the closed loop off supppose to help with idle?

The only issue u have with idle is it sometimes takes a few second to even out after coming to a stop or something
2014-02-12 01:47:16
#6
I love this EMS more and more...... NEMU will you be my valentine?
2014-02-12 14:21:52
#7
Originally Posted by lynchfourtwenty
Fuck ya!

Is the closed loop off supppose to help with idle?

The only issue u have with idle is it sometimes takes a few second to even out after coming to a stop or something


Just for those who don't want closed loop on during idle conditions (large injecrors/MAF) sometimes can cause some issues with leaner mixtures at idle.
2014-02-13 03:53:52
#8
Very nice, John. An ADC used as switch for launch control is supposed to see GROUND? Or 5V/12V?

This way is easier than going around to set up a specific voltage to arm the inputs for say the the generic outputs, programmable rev limiter, alternate maps, etc. If using the A/C and PSP idle up as stock, there are no more switches in some options. Hopefully is possible to include the ADCs in some of these other drop down menus

Like TunerPro, it helps even more if the compare function gives you also an option for a difference calculation (like -5 degrees timing in this cell and -2 in the other; 28 more units fuel here and there).

Good work, I don't wanna sound like I'm complaining
Last edited by gtswrx on 2014-02-13 at 04-01-17.
2014-02-13 15:26:50
#9
Documentation for this is in the works. ADC inputs are already in the triggers list for other outputs/functions. Will have a wiring diagram posted soon.

Dave
2014-02-13 15:50:47
#10
Here's a wiring diagram for using the NEMU ADC inputs as a digital input. The diode is required if the switch is already wired to a 12V source, such as the E-brake warning light switch. The 5V going to the 10k ohm resistor is from the 5V output in the breakout box.




Dave
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top