Thread: NX2000 SR20VET swap

Nice project!.
I'm doing something similar with my P11, i bought a 20v and will start the convertion, using TB Q45 and Nismotronic ECU.

i may have to hire you to do some fixing of my wiring..i just dont have the patience for all of it lol

So, it's been awhile since I have done an update.

I have blown the transmission. I have gotten everything for the six speed swap. I have changed the bell housing. That was not as bad as I thought it would be. I just need some time to get it in the garage and pull it out.
I have also fixed a wiring issue I have been dealing with. Radio kept losing power and was very annoying. I would hit the fuse and boom it would be back on. Clock would so go out. Switching fuses did not help. So, I bought a 6 relay/fuse box. Mounted it on my battery box in the trunk and did some rewiring. The remote for the door poppers is now mounted back there. I figured I would move the relays and fuses to something a little neater. Plus it seems that for some reason the air bag light would cause my passenger side door relay to activate. Not anymore! Just need to hook up the truck to an actuator.

Looks like the new harness I ordered will be here by the time I get the motor and transmission out.

Anytime you want to come down. Wiring is easy but time consuming. I would be happy to help.

working on getting the car running again, crank position and iat sensors i belive wiring is hacked somewhere as car was previously turbo'd from a previous owner, also car doesnt have rear o2 either (came from a non emission state) so it will eventually throw a code for that as well..

shitty part is i cant register it until i have it inspected, catch 22 because it has no plates on it now either..good times..might have to borrow dealer plate from a friend of mine and drive it down..that would actually kill two birds with one stone though because my maxima is down there with no plates as well..so i could drive one down and one back! lol

Sounds good to me, what is the car? I assume, it is VET you are installing?

nah its just a regular DE in there now, it was DE-T or DET sometime earlier in its life

So after blowing up the transmission over the summer, I finally finished buying all the six speed stuff.

It is all in the car and I have it moving. But, need to get the new wiring harness installed for the reverse lights to work. I also need to get a new speedo for the electronic speedometer, mine is currently cable. But all in all very happy with it. Need to work on engine bay clean up. Looks like a rats nest. Guess that will be my next project.

That's sounds like a bunch of good progress. Got any leads on a speedometer?

I may have one in my spare parts, but with moving from NY to AZ, I still have one more trip of stuff to bring out. Going there is one in one of those boxes. I'd, not I will be looking for a parts car or a spare car.