Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: How to Disable Some Sensor?

+ Reply To Thread
Posts: 1-5 of 5
2016-09-05 01:31:26
#1
How to Disable Some Sensor?
I am planning to Disable my Knock Sensor. How? Thanks.


Sent from my iPhone using Tapatalk
2016-09-05 02:02:03
#2
How to Disable Some Sensor?
Ok i did it. Whats the disadvantages and advantages....


Sent from my iPhone using Tapatalk
2016-09-05 09:19:28
#3
the easiest way is to disconnect the wire to the sensor, but run a 550k ohm resister in the knock sensor wire. the ecu will just keep reading the normal ohmage, and your right to roll.

advantages=none really.
disadvantages= it wont read knock.
what you should do= use a ecu that you can program what voltage knock it should listen too. i do this with my nismotronic. but thats another story. watch this

2016-09-06 17:19:31
#4
How to Disable Some Sensor?
Originally Posted by sss4me
the easiest way is to disconnect the wire to the sensor, but run a 550k ohm resister in the knock sensor wire. the ecu will just keep reading the normal ohmage, and your right to roll.

advantages=none really.
disadvantages= it wont read knock.
what you should do= use a ecu that you can program what voltage knock it should listen too. i do this with my nismotronic. but thats another story. watch this



What values of the Knock Sensor did you input? Im also using NeMu.
2016-09-09 05:24:47
#5
I disable my knock sensor too. I have forged pistons androds. I got knock occur at 1 psi and above. Is it real or ghost, I don't know. I assigned 10 afr for fuel and 0 degree timing, the knock sensor said I still knocking past 1 psi.. The ecu will retard 5 degree if you have knock
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top