Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Need a tune map NEMU SA

+ Reply To Thread
Posts: 1-4 of 4
2015-05-19 03:07:14
#1
Need a tune map NEMU SA
hey guys can sumone give me some tune for my set up. if anyone have tuned their car or have similar to my set up.
send to my email please. thanks. [email]yeethao06@gmail.com[/email]

Sr20VE
n1 cam
high comp. 12:1
de. maf
333cc stock Ve injector
2015-05-19 21:12:56
#2
You should start with one of the files in the Start Up folder. They are pretty close and considering not ever motor/setup is the same you will need to tune anyway. I would not suggest using someone else's tune as you do not know what they have done.
2015-05-19 21:46:33
#3
Originally Posted by squirlz
You should start with one of the files in the Start Up folder. They are pretty close and considering not ever motor/setup is the same you will need to tune anyway. I would not suggest using someone else's tune as you do not know what they have done.


i thought that too yesterday. i mean i have several from john, but its got my wideband type and ratio adjustment in, my switchpoint with my output, knock sensor off, power steer assist off, idle adjustments, god knows what else in there.

once you hook the base map in, if you have a wideband, you could send john some logs,easy cruising to start, wot later, he he would probably get you sorted in a week or so.
2015-05-21 07:27:47
#4
Start from the "SR20VE (330 B13).tcd" found in the startup calibrations.

[ATTACH=CONFIG]825[/ATTACH]
-20VE
-330 inj
-DE MAF

When running higher compression, remove a few degrees of timing from the whole map to be safe until you get it properly tuned. With the engine warmed up, get it to idle at 14.7 by adjusting the current injector size slightly (should not require much adjustment).
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top