Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: New TN member here - Back in a B13!

+ Reply To Thread
Posts: 11-20 of 20
2015-03-30 18:21:40
#11
Welcome! Good by honda hellooo ser
2015-03-30 18:31:41
#12
Well, I still have my Honda, just an SE-R also,

The other B13 was the one I gave away. My 2000 Accord is still serving me well.
Last edited by vorin on 2015-03-30 at 18-34-17.
2015-03-31 23:49:41
#13
So I nearly passed emissions with a cat that was gutted by a mechanic that used to work on it since they didn't have to test for emissions.

Of course, I didn't know the cat was gutted when I took it to be tested, but when I wanted an explanation from the seller, I learned that titbit of info.

Ah well, new cat is on the way and since it almost passed anyway, I know that it's not been aggressively tuned.
2015-04-06 13:46:27
#14
Had a bit of fun wrenching this weekend.
Visited my nearest salvage yard for the first time, pulled a few parts including pass. door body weatherstripping, rear windshield finisher, and some panel rivets and screws.

I also replaced the inside door handle and lock for the passenger side, and tried to replace the outside handle, before I found out that the aftermarket part I bought didn't fit well enough. I also removed some extra solderless connectors in the pass. door speaker and better secured it to the door.

Besides the exterior handles, I also get to return the TYC headlights I bought, since they can't accept the grille clips.
2015-04-13 13:52:38
#15
Updated
2015-04-14 15:42:52
#16
BTW, the G20 auto ECU won't do anything besides turn the CEL on since it's missing the ECU for the transmission.
2015-04-14 15:47:42
#17
I can't find any sort of consensus, according to my thread here - http://www.sr20-forum.com/tuning/77413-92-sentra-se-r-ecu-vs-93-g20-ecu.html

Some say the rev limit is changed, although the limit seems to be the same.

I think everyone says that the speed limiter is removed.

Some say that the timing tables are better tuned.

Some say that Auto ECUs are compatible with Manual cars, but not vice versa...
2015-04-14 15:50:42
#18
The rev limit on the B13 is 7500 and no speed limiter, same for the G20. On the B14, it was 7100, so that's where the G20 ECU would make a different. Same for the speed limit, 109 for B14, none for P10.
2015-04-14 16:05:19
#19
That's exactly why I specified years in my other post.

Ah well, I guess you saved me the hassle of finding the CEL myself. Thanks
2015-05-26 18:21:33
#20
Updated.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top