Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: "THE" cam lift & duration comparison thread

+ Reply To Thread
Posts: 1-10 of 72
2011-03-03 23:20:22
#1
"THE" cam lift & duration comparison thread
(some data pulled from the other forum)
Millimeter measurements are found in the parentheses "(X.XX mm)"

DE/DET cams
Jim Wolf Cams
S3 - .442" (11.2) LIFT / 260º DUR. - OVERLAP - 20º
S3HL -.457" (11.6) LIFT / 260º DUR.
S4 - .464" (11.8) LIFT / 266º DUR. - OVERLAP - 28º
S4HL -.484" (12.4) LIFT / 266º DUR.
S5 - .503" (12.8) LIFT / 281º DUR (avoid if you can, not a good cam)
S3R Roller Rocker - .450" (11.4) LIFT / 262º DUR - ??

C1 - .476" (12.1) LIFT / 264º DUR. - OVERLAP - 24º
C2 - .500" (12.7) LIFT / 275º DUR. - OVERLAP - 32º
C3 - .526" (13.4) LIFT / 285º DUR.

BrianCrower cams
BC stg 2 - .475" (12.1) LIFT / 264º DUR. (compares to JWT C1)
BC stg 3 - .495" (12.6) LIFT / 272º DUR. (compares to JWT C2)

Nissan (Original Equipment DE and DET)
Stock high port (91-93):
INTAKE - .394" (10.0) LIFT / 248º DUR - EXHAUST - .362" (9.2) LIFT / 240º DUR - OVERLAP - 16º

Stock low port (94):
INTAKE - .362" (9.2) LIFT / 240º DUR. - EXHAUST - .362" (9.2) LIFT / 240º DUR - OVERLAP - 16º

Stock low port (95-up):
INTAKE - .339" (8.6) LIFT / 232º DUR. - EXHAUST - .362" (9.2) LIFT / 240º DUR - OVERLAP - 8º

Stock GTI-R DET:
INTAKE - .394" (10.0) LIFT / 248º DUR - EXHAUST - .394" (10.0) LIFT / 248º DUR - OVERLAP - --º

ROLLER ROCKER CAMS
G20 2000-2002:
INTAKE - .370" (9.4) LIFT / 232º DUR - EXHAUST - .346" (8.8) LIFT / 240º DUR - OVERLAP - 8º

Sentra 2000:
INTAKE - .339" (8.6) LIFT / 240º DUR - EXHAUST - .362" (9.2) LIFT / 232º DUR - OVERLAP - 9º

Sentra 2001:
INTAKE - .370" (9.4) LIFT / 240º DUR - EXHAUST - .346" (8.8) LIFT / 232º DUR - OVERLAP - 9º


VVL CAMS
OE SR20VE cams
Low lobe INTAKE - .331" (8.4) LIFT /220º DUR - Low lobe EXHAUST -.260" (6.6) LIFT / 244º DUR - OVERLAP - 0º
High lobe INTAKE - .421" (10.7) LIFT /264º DUR - High lobe EXHAUST -.407" (10.34) LIFT / 268º DUR - OVERLAP - 48º

OE SR16VE:
Low lobe INTAKE - .279" (7.1) LIFT / 200º DUR - Low lobe EXHAUST - .313" (7.95) LIFT / 244º DUR - OVERLAP - 0º
High lobe INTAKE - .437" (11.1) LIFT / 280º DUR - High lobe EXHAUST - .437" (11.1) LIFT / 280º DUR - OVERLAP - 70º

OE SR16VE N1:
Low lobe INTAKE - .331" (8.4) LIFT / 220º DUR - Low lobe EXHAUST -.313" (7.95) LIFT / 244º DUR - OVERLAP - 0º - RED
High lobe INTAKE - .472" (12.0) LIFT / 288º DUR - High lobe EXHAUST -.469" (11.9) LIFT / 288º DUR - OVERLAP - 74º - GREEN

OE SR20VE 20V:
Low lobe INTAKE - .398" (10.11) LIFT /228º DUR - Low lobe EXHAUST - .327" (8.3) LIFT / 244º DUR - OVERLAP - ---º
High lobe INTAKE - .472" (12.0) LIFT /278º DUR - High lobe EXHAUST - .439" (11.15) LIFT / 280º DUR - OVERLAP - 57º

OE SR20VET:
Low lobe INTAKE - .315" (8.0) LIFT / 212º DUR - Low lobe EXHAUST -.445" (11.3) LIFT / 244º DUR - OVERLAP - 0º - PINK
High lobe INTAKE - .433" (11.0) LIFT / 248º DUR - High lobe EXHAUST (LOW Lobe is used) -.445" (11.3) LIFT / 244º DUR - OVERLAP - 13º - LIGHT GREEN

someone help a brother out filling in the xx's

Kelford 184-A:

Kelford 184-B:

Kelford 184-C:
Low lobe INTAKE - .xxx" LIFT / 266º DUR - Low lobe EXHAUST - .xxx" LIFT / 258º DUR
High Lobe INTAKE - .492" (12.5) LIFT / 314º DUR - High lobe EXHAUST - .453" (11.5) LIFT / 313º DUR

Kelford 184-C series II:
Low lobe INTAKE - .xxx" LIFT / xxxº DUR - Low lobe EXHAUST - .xxx" LIFT / xxxº DUR
High lobe INTAKE - .xxx" LIFT / xxxº DUR - High lobe EXHAUST - .xxx" LIFT / xxxº DUR


Kelford 184-D:


good VE cam thread for reference:
http://www.sr20-forum.com/vvl/14455-safe-max-rev-srxxve-cams.html
JWT SR20 Cam Specs PDF
Last edited by vqman on 2014-01-19 at 01-45-54. Reason: added mm lift figures for Kelford 184 cams
2011-03-03 23:24:46
#2
I've been looking for something like this for a while. I can dig it, good work thus far. Thanks VQman.
2011-03-03 23:26:53
#3
thanks but it's mostly a cut/paste job from the old forum..

S3, S4, S5 cam comparison - SR20 Forum


2011-03-03 23:29:48
#4
Dang, I never tried looking there for this. DOH!
2011-03-04 21:31:34
#5
Stickified
2011-03-04 21:32:44
#6
Looks like BC cams are more closely related to JWT C grind cams.

Wouldn't have thought that...
2011-03-04 21:56:35
#7
yeah, almost copies.. I think i'll be doing BC stage 3's if I can ever get around to it..
2011-03-04 22:21:16
#8
Stock GTI-R DET cams (IN- .394 LIFT / 248 DEG.DUR - EXH - .394 LIFT / 248 DEG.DUR)

^So who is running a GTi-R exhaust cam in their highport/lowport? I have a set, but never tried this combo.
Last edited by MR-4Door-SR20DET on 2012-11-08 at 17-23-34.
2011-03-04 22:33:46
#9
Originally Posted by vqman
yeah, almost copies.. I think i'll be doing BC stage 3's if I can ever get around to it..


That's what I ran in the DET. Could have sworn they were closer to S4's though, didn't really pay any attention.
2011-03-04 22:55:23
#10
Originally Posted by MR-4Door-SR20DET
Stock GTI-R DET cams (IN- .394 LIFT / 248 DEG.DUR - EXH - .394 LIFT / 248 DEG.DUR)

^So who is running a GTi-R exhaust cam in there highport/lowport? I have a set, but never tried this combo.


yeah I was noticing that the GTiR exhaust cam would go nicely with a highport intake cam in the better flowing lowport head.. (if you didn't want to shell out big cash for a set of aftermarket cams.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top