Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: "THE" Brake Thread

+ Reply To Thread
Posts: 51-60 of 270
2010-07-06 05:16:50
#51
Originally Posted by Joekuh
According to what I was told, only b13s can use the JDM NX rear rotors. Remember that in this scenario, B13's are using A32 Maxima rear rotors. B14's are running A33's.


Rotors or Calipers?

B13's uses J30 (89-94) Maxima rear calipers

B14's uses A32 (95-99) Maxima rear calipers
2010-07-06 05:19:08
#52
A32 rear calipers without pads come in at 7.5 lbs.
2010-07-06 05:29:23
#53
AD22VF calipers without pads are 9 lbs.
2010-07-06 06:19:58
#54
One of these days when I have a lot of time I want to compe a brake threa similar to Shawn's suspension thread...
2010-07-06 06:27:20
#55
Can't believe this one was missed. Thread stuck, great job Joekuh
2010-07-06 12:54:15
#56
Originally Posted by Vadim
Can't believe this one was missed. Thread stuck, great job Joekuh


Thanks for putting the pressure on me Vad. Now I really need to keep this updated, LOL

Originally Posted by vqman
One of these days when I have a lot of time I want to compe a brake threa similar to Shawn's suspension thread...

That was the idea when I started this. But I'm quickly finding out it's a LOT of work. But I'm slowly getting it together.

Originally Posted by sr20jet
Rotors or Calipers?

B13's uses J30 (89-94) Maxima rear calipers

B14's uses A32 (95-99) Maxima rear calipers


When you read his question, he's talking about rotors. You're right, those are the calipers used for each chassis. The rotors are different, however. I have from a good source that B13's use JDM NX rotors, and from personal experience you have to use redrilled 95-99 Maxima rotors.
2010-07-06 13:30:47
#57
Originally Posted by Joekuh
Thanks for putting the pressure on me Vad. Now I really need to keep this updated, LOL


That's what I'm here for, now finish the thread!
2010-07-06 14:57:12
#58
Originally Posted by Joekuh
That was the idea when I started this. But I'm quickly finding out it's a LOT of work.
You can say that again.
2010-07-06 16:35:10
#59
FRONT: '04-'06 B15 Spec V 4 Piston Brembo Calipers, 12" Slotted and dimpled rotor (drilled for 4x100), HAWK pads.
WARNING!: Is very limited on what wheels will clear these calipers. Currently have Motegi 17" Traklites w/ 42 offset (no spacer) and it leave only a few millimeters of clearance between the wheel spokes and the calipers. Though, by my measurements you should be able to fit a 16" Traklite over these calipers.
Note: You will need to swap out your spindle for a B15 spindle or have a bracket made for these calipers.

REAR: A32 Maxima calipers, 11" slotted and drilled rotors (drilled for 4x100), HAWK pads.

Master Cylinder: U13 Altima Master Cylinder

MIS.: Braided SS front and rear lines.

Performance Wise: She stops where I want her too when I tell her too. No complaints for street use; haven’t tried the setup on the track yet.
2010-07-06 17:02:41
#60
Zer, what do you drive? I'm thinking B14. Actually, I know B14, just remembered I sold you those corners
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top