Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Official Weight Reduction Post!!! Reborn!

+ Reply To Thread
Posts: 61-68 of 68
2012-08-22 19:28:46
#61
Thanks John!
2012-08-22 19:30:54
#62
Originally Posted by Dave_SR20
Thanks John!


Your welcome. I also found the original version of this from the old forum.

Official Weight Reduction Post!!! - SR20 Forum

And this from forum member @~KnuckleDuster~:

http://www.sr20forum.com/general-sr20/138937-official-weight-reduction-list.html
Last edited by B15NEOVVL on 2012-08-22 at 19-56-40.
2013-10-12 03:46:44
#63
Sorry for re-upping an older thread, but where exactly is this "brace" under the steering wheel? I'm in the process of removing as much weight as possible in my 92 SE-R VVL (all under-carpet tar has been removed, front and back) but I'm now I'm at thatt rubber stuff/thick carpeting underneath the dashboards under the dash.

But where is this brace, and what does it look like? I have all the seat outs and even removed the steering wheel to have access to everything.
Last edited by Storm88000 on 2013-10-12 at 03-51-18.
2013-10-12 04:01:27
#64
Once you pull the plastic cover in front of your knees you'll see it. I can't describe it very well as I haven't actually seen one in 10 years or so lol.
2014-06-04 10:16:27
#65
I think mine has already been removed by someone, because I couldn't find it. I even pulled the entire steering wheel off thinking I missed it.
2014-06-05 23:57:58
#66
Originally Posted by Storm88000
I think mine has already been removed by someone, because I couldn't find it. I even pulled the entire steering wheel off thinking I missed it.


its the curved thing under where you adjust the steering wheel height as seen in this pic
2014-07-18 13:12:07
#67
Originally Posted by 92SentraSE-R
Originally Posted by Storm88000
I think mine has already been removed by someone, because I couldn't find it. I even pulled the entire steering wheel off thinking I missed it.


its the curved thing under where you adjust the steering wheel height as seen in this pic



93 sentra e model with a vvl swap
Gutted
No a/c
No ps no abs no spare no seats or rear panels
Etc before I start cutting I weight it
Had a 1/4 tank on a 13 gallon tank that would be 26 pounds full tank should be 104
I weigh 185

Well on a 1/4 tank it weighted 2,220lbs

And I had a sr20de when I weighted

Not I got a vvl n less weight =) =-D
2014-07-18 19:47:27
#68
I just put in a Carbon Fiber hood. I had a scale handy and weighed both during the install:

Stock B13 hood: 38lbs

Carbon Fiber hood w/ attachments and cotter pins: 18.5lbs.


So there's a nice saving of about 20lbs.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top