Thread: GA16DE to SR20DE general cost thread

Made this list ages ago not sure if most of it still stands but here is what I came up with. Keep in mind I made this list around 5-6 years ago. :o

This was made with the B13 in-mind. Im not sure how the B14's prices and swap goes, iv head things are differnt.

SR20DE Engine...$250-500

SE.R-NX2000 Transmission...$300-450

SE.R-NX2000 Axles... $70 a peice after the core charges

SE.R-NX2000 Radiator... new $150-200 used $50-100

SE.R-NX2000 ECU... $50-80 bucks

SE.R-NX2000 Wiring Harness...$100-130

SE.R-NX2000 Exhuast Manifold/Downpipe..$50-100 shipped. Your best bet on that one is get a OXB or PS for around $200.

SE.R-NX2000 Motor Mounts...$200 for the Placeracing set. Run about $50-75 for the set in the junk yard.

SE.R-NX2000 Motor Mount Brackets...$50-75. These are extrememly important if you are swaping in a JDM SR20DE

SE.R-NX2000 Power Steering Pump and Lines...Still not sure about that one. Eliminator Kit is $130

SE.R-NX2000 Flywheel...$50-60

SE.R-NX2000 Clutch...$100-300 Depends on what your looking for.

SR20DE Termostat - $10-15

SR20DE Seals... $25 Mainly the front and rear main seals

Motor Oil...$20 for 4 quarts if Synthetic

Transmission Gear Oil...$10 for plain oil. Redline(MT-90) runs about $40.

you can PM or hit me up on AIM anytime...any questions or comment

Do you need to change the cross member from a xe to a se-r?

^Depends if it was a AUTO or MANUAL...............Auto YES. Manual 1.6L NO, it is the same as the Manual 2.0L

^What's up with this one?

You are out of here

haha w0w gold spammers invade the interweb selling fake money for real money! Like magic beans lollolol

..........

I did that like like 7 years ago. lol

Erm think I was going for wasn't sure about the pump cause I had an E model and didn't have Power Steering. I had to fab up a bracket for the power steering pulley.

power steering lines from the xe worked fine with the pump from se-r

^Good to know. Thanks for the reply.