Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: b13 stock rims and it's stock percussion lead be gone?

+ Reply To Thread
Posts: 1-5 of 5
2020-10-26 15:57:30
#1
b13 stock rims and it's stock percussion lead be gone?
Not sure this should be in eggs but I figured all the stock b13's rims are tight fit with the ADV22F calliper.



This works, I checked it first, doesn't give noise, doesn't fall off, doesn't vibrate since it didn't fall off. No visible damage on the lead itself
Last edited by richardwbb on 2020-10-26 at 16-58-01.
2020-10-27 12:37:01
#2
I believe that’s an NX wheel which came stock with the ADV22 brakes so there should be no issues. And I think with some caliper grinding, they should fit beneath the B13 SE-R rims too.
2020-10-27 12:55:19
#3
Yes I have an egg shelled b13. The lead shown on the picture was 0.1mm from the calliper but there is also flatter lead you can ask for at a tyre shop. They should have it because for example some nowadays BMW's have this kind of space. This flatter lead gave 0.7 - 0.8mm but those wheels are at the rear now. But this is Nx specific you say?
2020-10-27 12:59:06
#4
Yes, those are egg-specific wheels. They are supposed to clear the ADV22F calipers.
2020-10-28 14:55:43
#5
Noice that Nissan put percussion lead to it. I sense a bit that they do that purposefully on the other hand that is not Nissan as I know them but some brands do have useless percussion lead, two fingers room between stock rim and calliper :/
Last edited by richardwbb on 2020-10-28 at 15-04-27.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top