Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Starter replacement tips, tricks, anything because this sucks balls!!

+ Reply To Thread
Posts: 41-44 of 44
2015-02-04 05:40:17
#41
Originally Posted by Storm88000
For me, got the starter out without much of a problem today

Woot!

Originally Posted by Storm88000
except for the fact that its in a hard spot and you have to crawl under the car at points.

Starter on Sentras is much easier if u can get under it. And it's BEHIND the engine. Jacks are good, ramps even better. Just push start it one more time....

Originally Posted by Storm88000
Luckily for me the previous owner must have removed the bracket, and it's a 98! w00t!!!!

More reason to stick w/ b13
2015-02-04 14:57:04
#42
Originally Posted by Storm88000
For me, got the starter out without much of a problem today except for the fact that its in a hard spot and you have to crawl under the car at points. Luckily for me the previous owner must have removed the bracket, and it's a 98! w00t!!!!


Good to hear! And yes, the location is not ideal. Lucky no bracket. It's not impossible, just does take some patience. And booze.

Previous owner is a saint!




No updates on this yet guys. More snow and shoveling last night. Took me almost 2 hours to get home. HOPEFULLY will get some time in tonight and will update if I have some luck!
2015-02-06 04:30:04
#43
Originally Posted by FormerRSXSowner
Originally Posted by Storm88000
For me, got the starter out without much of a problem today except for the fact that its in a hard spot and you have to crawl under the car at points. Luckily for me the previous owner must have removed the bracket, and it's a 98! w00t!!!!


Good to hear! And yes, the location is not ideal. Lucky no bracket. It's not impossible, just does take some patience. And booze.

Previous owner is a saint!




No updates on this yet guys. More snow and shoveling last night. Took me almost 2 hours to get home. HOPEFULLY will get some time in tonight and will update if I have some luck!



And another storm coming this weekend possibly, for you and us on the east coast. Ridiculous!
2015-08-17 13:53:31
#44
Belated update:

Corrosion from being in the salt belt was the culprit. Couldn't get a good angle to whack it off with just stands. Pushed it to a local repair shop and one on a lift they were able to whack it off. Put on remanned unit and it works well.

Sorry for the delay in response on this.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top