Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: help with mechanical guages

+ Reply To Thread
Posts: 1-4 of 4
2013-10-10 01:08:08
#1
help with mechanical guages
I am currently building my b13 to go racing and am working on hooking up a couple of guages. I have a mechanical oil pressure and fuel pressure guages and isolaters to run the guages in the car the trouble is I don't know where/how to hook the lines into the fuel and oil. I have steel braided lines to hook in just need guidance on where to run the lines pics would be nice but any help would be great
2013-10-10 11:46:03
#2
The oil sending unit needs to be teed with an 1/8 closed niplle and tee from a plumbing supply store or local auto parts replug the sender on the run and plug the line in the bull.fpr gauge I would run it on supply side after the filter
2013-10-10 15:32:45
#3
Oil sending unit uses 1/8 BSPT not NPT, You need to buy an adapter to get it to thread without cross-threading.

Check this post for some examples.
2013-10-13 21:04:21
#4
For the fuel pressure I have a nismo fpr I should splice in after that correct? And the oil sending unit is part of the guage so its just the line I am hooking in and I was wondering where exactly to tee into the system.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top