Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: p10 clutch cable in nx?

+ Reply To Thread
Posts: 1-6 of 6
2011-11-26 01:30:23
#1
p10 clutch cable in nx?
Idk if anyone has done this or not but im in a bit of a pickle right now and know there is a p10 at the yard by my house with a good clutch cable that i want to take and put on the nx.

the only difference i can find between the two are that the g20 cable is 31.875" long and the sentra se-r cable is 32" long

greg said you cant use a B13, B14 SR20 or GA16 clutch cable in a P10 but what about the other way around? I'm just throwing ideas out there right now hate to buy a cheap autocrap store on with a fx500 going to snap it in no time
Last edited by morgans432 on 2011-11-26 at 01-37-39.
2011-11-26 01:50:17
#2
They all appear to be similar in shape and lengths between the stop points and where they attach to the pedal and clutch arm. Other than overall length of the two i dont see why they wouldnt be interchangeable.

The only thing i can think of is the p10 may have a different length between the stop on the firewall to the pedal attachment. Maybe someone that has actually had the two side by side can chime in.
2011-11-26 01:54:02
#3
yeah and they all pretty much share the same design idea from looking at it.
2011-11-26 01:59:51
#4
Yeah thats the only thing I can think of is differences in lengths from the firewall to the pedal which if the p10 was longer that would give you shorter length on the opposite end from the pivot point. In that case would be a good thing and give you more adjustment room.

Might be worth a shot, im sure you could get the cable for next to nothing as brand new oem's are 45 bucks or so from Greg.
2011-11-26 02:00:54
#5
i ordered an autozone special for right now but still want to pull the p10 one and give it a shot for shits and giggles. more adjustment the better with these cables

hydro is calling my name very soon
2011-11-26 02:25:23
#6
Hydro and you will never look back to another cable ever again. My buddy is selling his hydro clutch setup complete but im sure hes probably gonna have it sold being he has like 3 people wanting it. Its one of the setups I made and modified. Just have to redrill the holes on the firewall and remove the spacers off the firewall and thats it.

Hydro is one of those things the b13 should have come with factory. lol.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top