Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: I've searched.. QR25 swap in P11

+ Reply To Thread
Posts: 1-10 of 13
2018-12-19 21:03:49
#1
I've searched.. QR25 swap in P11
now now now calm down.... Yes it is happening.. qr25 turbo engine and 6 speed trans in my 00 g20..

haven't done it before and apparently noone else has either, or there's no documentation.
I've put 6 speeds in b13, VE's in several different things, did a lotta customization to other things as well. So mechanically not afraid to tackle anything. Financially I do have a budget, so that's why I'm here.

I'm resourcing swap stuff now.. the obvious motor, trans, mounts, linkage, cross member, axles, wiring, blah blah blah.. I stopped by that shop "2j-Racing" and talked to Joe there. Very informative guy, knows everything! but honestly don't think he knows what I got going on. he's saying I basically need a whole car to swap everything. I don't doubt him, but I don't know.

the shifter assy and everything transmission wise is covered in threads. I'm only concerned about how that qr engine and trans will sit in there.. cross member, mount points, etc... I'm not afraid of fabrication.

Basically asking for help with identifying the differences between the K member subframe thing that the steering rack, rear crossmember, control arms bolt to.

Long stoory short, how similar is the k member between B15 and P11? I don't have them side by side to compare.. but my p11 is sitting waiting for this. and I need to source stuff soon.. like 2 days..

thanks. If I don't get back on to respond, it's cuz I'm trapped under the car sleeping. I'll be back.

#forumlivesmatter

2018-12-19 21:39:43
#2
Didn't that dude from 2J shit all over an SR20 on B15U forums??

I will end positively with, "good luck."
Last edited by Kyle on 2018-12-19 at 21-41-20.
2018-12-20 02:45:20
#3
Why a qr man? Id rather see you do a honda k series swap lol
2018-12-20 07:52:31
#4
I'm okay with this. It's not nearly as bad (not even close) as the "sinister Sentra" twin turbo LS swapped, rwd B13. All that cash pissed away and the car runs 10's, lol!

Good luck with the swap!
2018-12-24 09:17:22
#5
Cool story bro.
2019-01-03 09:33:19
#6
I'm local, pm sent
2019-01-07 23:51:07
#7
Good luck man. I saw a vid of a built QR25 turbo in a B13 making 700+ hp.

The QR is not the most loved engine but there are tons of them in the junkyards right now which is a plus.
2019-02-23 20:46:02
#8
Photobucket has quit being a douche, so I'll be posting pix

Also, I'm rushing to get other projects done first, so I've postponed the swap till further notice. Set the engine and trans in for measurements, and plucked em right back out to make mounts. And car's back outside, that's where I'm at currently.

2019-02-23 20:49:56
#9
Originally Posted by lynchfourtwenty
Why a qr man? Id rather see you do a honda k series swap lol


Cuz. Idk. Why not? Ima try, then if i can't, then I'll just drop my ve in and turbo it like everyone else does. Also want it 6speed though.
2019-02-23 20:56:36
#10
Also, b13 and p11 engine bays are a lot different. Looks line the b15 and p11 bays have more in common. It doesn't look like I'll need the whole kmember swap. Looks like my main issue for now is vertical height. Distance between the cross member and the hood. As far as mounts, i think a custom fabbed cross member is all i need to make first. Then it's in there. Other 2 mounts can't be made until the crossmember is.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top