Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Rebuild Kit

+ Reply To Thread
Posts: 1-10 of 10
2008-04-09 13:07:46
#1
Rebuild Kit
I got an SR20DE for next to nothing and I have decided to turbo the thing. I have stripped the entire engine and thoroughly cleaned the block and in the process of cleaning the head and I will be tapping the block for the return and also tapping the block for the oil squirters as well. What I want to know is where can I get a full rebuild kit for the high port SR20 motors. I am going turbo so I am thinking to get the SR20DET high port rebuild kit. Can you let me know where I can get this and a cost? I will need all gaskets and seals, water pump and oil pump, tension chain and guides. Thanks in advance and tell me where I can look, preferably OEM stuff. I will be going with ACL bearings, DET pistons with either total seal rings or OEM rings, and an S15 T28 with a pulsar manifold, all braided lines, 480CC injectors, Z32 MAF, Emanage Ultimate and whatever else to match the setup. This is all going in an AWD B13.

Jason.
2008-04-09 19:58:02
#2
Pics of the AWD B13 (underneath please).

GregV should have all the parts you need.
2008-04-09 20:25:27
#3
^x2 gregv is where it should be at
2008-04-09 20:30:38
#4
where would you tap the block for oil squirters? pics please

I would also like to see the awd b13 :-)

If gregV dont have em. try Justin at InfinitiPartsusa.com/EverythingNissan.com
2008-04-13 11:26:26
#5
there are kits on ebay for the gtir for gaskets
http://cgi.ebay.com/ebaymotors/Nissan-SR20DET-GTIR-Engine-Gasket-Kit-RNN14-Pulsar-SR20_W0QQcmdZViewItemQQ_trksidZp1638Q2em118Q2el1247QQcategoryZ33667QQihZ008QQitemZ180168305944QQrdZ1QQsspagenameZWD1V
2008-04-13 23:35:44
#6
the time and money it takes to drill and tap and mill a de block for det oil squirters is not worth it. skip the total seal rings and go with the oem rings.
2008-04-14 13:22:22
#7
So what not to worry about the squirters? On the underside of the block you can see there are four flat areas where the squirters are usually. I was thinking to get the squirters from a damaged DET block and get the pitch from the squirter bolts and go to the local store and pickup a drill bit and tap and do it myself. I just did the tapping of the block and I don't see it being too difficult. I will take your advice on the oem rings. Also for reference, the DET rings and DE rings are they the same?
2008-04-15 16:12:34
#8
Bump anyone know where I can get these items. I contacted GregV but not reply yet.
2008-04-15 16:20:39
#9
Where's the pics?

Call GregV, great guy and can get anything you need, and won't BS you.
2008-04-15 16:37:25
#10
I sent him a PM, I live in Trinidad so for now I will email. If not later on I will give him a call. I will get pics this week I got the camera working again.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top