Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: EGT Gauge

+ Reply To Thread
Posts: 1-10 of 25
2008-12-05 05:04:22
#1
EGT Gauge
Well I have a place for one more gauge... So I'm thinking about doing EGT gauge. From what I understood you can basically tell if your running to rich or too lean by the gauge (without bothering with a wideband).

Does anyone have specifics on where to put the Gauge? I found this website, which had a lot of useful stuff.

How to install EGT on a DSM

Swiss runs the EGT gauge on the 3rd cylinder here

I already have the following gauges/readings:
  • Boost
  • Oil Pressure
  • Water Temperature
  • Voltage
2008-12-05 06:29:35
#2
EGT gauges are old school for tuning aspects relatively. Depends on how much info you need on your engine....but for your needs screw the EGT gauge a wideband would be a much better investment and more helpful.....Get a UEGO......
2008-12-05 08:17:54
#3
If you're too rich, leaning it out with decrease your EGTs. If you're too lean, richening the mixture will decrease your EGTs.

Confusing ain't it?

What good are they? Well, once you have your fuel map pretty well set up, you can use an EGT gauge to see what happens when you mess with your timing. That way you can monitor if you're adding too much timing or if you need to add more. That's normally done after you have a pretty decent fuel map.
2008-12-05 13:48:03
#4
Originally Posted by sniper571
EGT gauges are old school for tuning aspects relatively. Depends on how much info you need on your engine....but for your needs screw the EGT gauge a wideband would be a much better investment and more helpful.....Get a UEGO......


Wideband is not as elite as manually reading things! Haha. But widebands are a little out of my price range...

Originally Posted by mafoose
If you're too rich, leaning it out with decrease your EGTs. If you're too lean, richening the mixture will decrease your EGTs.

Confusing ain't it?

What good are they? Well, once you have your fuel map pretty well set up, you can use an EGT gauge to see what happens when you mess with your timing. That way you can monitor if you're adding too much timing or if you need to add more. That's normally done after you have a pretty decent fuel map.


That's not all that confusing hehe.
2008-12-05 14:29:58
#5
Originally Posted by Vadim
From what I understood you can basically tell if your running to rich or too lean by the gauge (without bothering with a wideband).
You understand wrong.

You need to read this:

http://www.sr20-forum.com/turbo/11593-lets-talk-gauges.html

And you need to buy a wideband O2 sensor + controller at the least if you plan on tuning. I recommend the Innovate LC-1 controller (get it with a gauge if you aren't going to tune with logging, and insist on tuning by viewing the gauge).
Innovate Motorsports LC-1 and LM-2 WBo2 WideBand o2 Systems - DIYAutoTune.com
Someone else suggested the AEM UEGO, which is decent, but you might want to read this before buying it:
http://www.diyautotune.com/downloads/Wideband%20Shootout.pdf

Originally Posted by Vadim
widebands are a little out of my price range...

Too bad.



EGTs are not for tuning fuel, they are for tuning timing.
2008-12-05 15:02:58
#6
^^ Thanks for the heads up, yeah now looking at it it's kinda point less got get the EGT.
2008-12-05 15:24:06
#7
Originally Posted by Vadim
^^ Thanks for the heads up, yeah now looking at it it's kinda point less got get the EGT.
It's not pointless. It's just not for tuning fuel. It's great for tuning timing...
2008-12-05 15:30:00
#8
I'm sorry, the Wideband Shoot-out link I had before wasn't right (you needed a subscription to see the results). I'd edited the post, and here's the right link again:
http://www.diyautotune.com/downloads/Wideband%20Shootout.pdf
2008-12-05 15:32:02
#9
Originally Posted by BenFenner
It's not pointless. It's just not for tuning fuel. It's great for tuning timing...


Sorry let me clarify that, kinda pointless for me to get it

Originally Posted by BenFenner
I'm sorry, the Wideband Shoot-out link I had before wasn't right (you needed a subscription to see the results). I'd edited the post, and here's the right link again:
http://www.diyautotune.com/downloads/Wideband%20Shootout.pdf


Ah I remember seeing that article before, I'll take a look at home
2008-12-05 15:52:21
#10
Originally Posted by Vadim
Sorry let me clarify that, kinda pointless for me to get it
You can tune timing with the Calum ECU. =]
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top