Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: 6 speed swap bolt sizes

+ Reply To Thread
Posts: 1-5 of 5
2017-05-20 05:44:39
#1
6 speed swap bolt sizes
Does anyone have the sizes of the bolts needed for the 6 speed swap? I was told the bell housing to motor/ starter and rear mount bolts will need to be longer. I'd like to collect these bolts before I start converting everything next week. If not I guess I'll figure it out once that day comes. I did a search but it was such an old thread that the pic doesn't load anymore. Thanks guys
2017-05-20 16:03:39
#2
@lynchfourtwenty could probably tell you...he's done several 6-speed swaps
2017-05-20 21:58:28
#3
We got a buncha bolts sent to us from Mark @ Marsh tuning, many we ended up not needing but so bin not sure exactly..

You can reuse some of the stock bolts, others need to be longer.. I think my can reuse 1 starter bolt but the bother needs to be shorter..

Not really a big deal just figure out what u need an go get it when the time comes
2017-05-20 23:01:50
#4
Auto tech motoring has the 6 speed hardware so you don't have to look for the bolts. Email him that's the best way to get a hold of him or through fb

Sent from my SM-G930T using Tapatalk
Last edited by s-eriouse92 on 2017-05-20 at 23-03-03.
2017-05-21 00:42:17
#5
Ok thanks for the help guys, someone sent me this also, hopefully it can help someone down the road
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top