Thread: AD22 brakes on a Versa

I never had AD22 as I've never had a B series car or NX. But I've been on these forums long enough that when I saw AD22 in the FSM for a nissan versa I figure I would post up the findings. The AD22's come on the 1.6l Versa. But the 1.8 liter has bigger caliper and rotors. I'm not sure if any of this can swap over to any SR powered cars but just in case it can I am presenting this information. I know the AD22's don't end in "VK" but these still may work.

interesting.. anyone tried the fitment yet?

the ad22 equipped Versa's just became available 11/08. So I'm assuming getting brakes from one is hard. They are a low production vehicle and I bet not many crashed yet. I don't even know if the 1.8l swap over to the 1.6l. If I ever get wheels though I will find out. OEM brake upgrades are the best.

Nice dig.

editt

edit because He^^ editted

great info, id like to be able to get a set off a vera if they are the same as or bigger than an NX, plus they wont be 15yrs old

The versa Shares its hubs with the B15 so you would have to make an adapter plate to fit the brakes onto a b13/b14.

^^dont understand, what do the hubs have to do with the brakes, if any difference,it will be at the mounting points at the spindle

versa and B15's are 4x114, B13 and B14 are 4x100