Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Our new SR20 custom engine harness

+ Reply To Thread
Posts: 1-10 of 26
2016-08-03 02:31:57
#1
Our new SR20 custom engine harness
** For those that have not seen our new product yet **


We are finally ready to introduce our Stage 1 engine harness for Nissan B13/B14, NX2000, Infiniti P10/P11 chassis's that will be in full production mode starting IMMEDIATELY.
You will be able to fully customize your engine harness to each specific item you have on your engine. From different MAF/MAP sensor, to COP conversion. We only utilize brand new connectors, pins, terminals and the highest grade of tefzel/milspec wiring available.
The harness pictured has the option of individual labeling to easily determine which plug is what.
Please go to our website to properly select your options and build your harness to get your final price.

We will offer for a limited time, an additional 5% off all harness orders + FREE SHIPPING + Grounding wire kit with all orders. Use coupon code HARN5SPC upon checkout.

If you have any questions, please feel free to message us here, email [email]sales@autotechmotoring.com[/email] or call us 949-351-2958





2016-08-03 09:49:58
#2
OK, I have a question.
Would you be able to make a sr20vet harness for a NX with a s13 ECU?
2016-08-03 15:13:59
#3
I have made a custom version my RWD DET harness to support the vvl head on my block. Could I send that harness to you as a template and you build me a more professional version, similar to this pictured here?
2016-08-06 15:00:41
#4
I found the site a little difficult to navigate, but eventually found the place to get the harness: Engine Harnesses - Autotech Motoring

I wish you'd been doing this back when I made mine! That price is worth every penny. I'd charge 2-3 times that to make one if I had to do it again...
Last edited by BenFenner on 2016-08-06 at 15-21-15.
2016-08-11 03:26:05
#5
Originally Posted by calvin269;1047053
OK, I have a question.
Would you be able to make a sr20vet harness for a NX with a s13 ECU?


Yes that is no problem.
2016-08-11 03:27:16
#6
Originally Posted by blo0d;1047073
I have made a custom version my RWD DET harness to support the vvl head on my block. Could I send that harness to you as a template and you build me a more professional version, similar to this pictured here?


You dont have to send us your harness. We build all our harnesses brand new from scratch. Just go to the website and select all the options you have and we will do the rest.
2016-08-11 13:53:27
#7
Originally Posted by AutotechMotoring;1047475
Originally Posted by calvin269;1047053
OK, I have a question.
Would you be able to make a sr20vet harness for a NX with a s13 ECU?


Yes that is no problem.


I don't see an option for different stock ECUs.
2016-08-11 16:02:19
#8
Is there a picture of the harness WITHOUT the upgraded Raychem DR-25 sleeving?
2016-08-11 21:01:47
#9
Originally Posted by AutotechMotoring;1047476
Originally Posted by blo0d;1047073
I have made a custom version my RWD DET harness to support the vvl head on my block. Could I send that harness to you as a template and you build me a more professional version, similar to this pictured here?


You dont have to send us your harness. We build all our harnesses brand new from scratch. Just go to the website and select all the options you have and we will do the rest.


Ok, I will take a look at it, but I figure the lengths of travel for sensors, along with all the stock stuff I bypassed/relocated would be of use to you...

Looked, no s13 option...
Last edited by blo0d on 2016-08-11 at 21-05-03.
2016-08-12 23:03:10
#10
Originally Posted by 1fastser;1047504
Is there a picture of the harness WITHOUT the upgraded Raychem DR-25 sleeving?


The one pictured is not Raychem'd. That is the standard braided sleeving.
+ Reply To Thread
Quick Reply
Thread Information
There are currently ? users browsing this thread. (? members & ? guests)
StubUserName

Back to top