Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Any idea of the CFM of a VE head?

+ Reply To Thread
Posts: 1-4 of 4
2014-08-02 00:25:52
#1
Any idea of the CFM of a VE head?
Hi team, who would know the flow, in CFM @ 28" of a healthy VE head?

TIA.
2014-08-02 04:43:33
#2
So I wanted to get the VVL head flowbenched, just to have some figures in hand and verify what I had been seeing on the web... The top numbers are the VE head and the bottom numbers are from a highport SR head.

Flow test was done on a completely stock SR20VE head. Machine used was a Superflow 600 test bench at 28" of H20 and low 80's temp.

SR20VE
Intake
Lift CFM
.050 49
.100 86.2
.150 122.6
.200 158.6
.250 192.5
.300 225
.350 249.2
.400 263.5
.450 272.9

Exhaust

Lift CFM
.050 46.5
.100 86
.150 118.5
.200 147
.250 171
.300 183.5
.350 188.8
.400 193
.450 196

For some added information, I've done some search on Highport heads and found these numbers...

intake test at 28in H2O, temp 88deg F
SR20DET
Lift CFM
.060 43.4
.080 60.7
.120 92.9
.180 134.5
.260 175.6
.340 192..3
.440 201.8
.460 202.3
.480 203.5
.500 203.6


exhaust test at 28in H2O, temp 95deg F

Lift CFM
.100 41.1
.140 75.0
.200 98.2
.240 106.5
.280 110.2
.360 113.0
.440 114.3
.480 114.7
.500 114.9

Jr_ss posted this on Zilvia
2014-08-02 06:11:17
#3
Originally Posted by BlueRB240
So I wanted to get the VVL head flowbenched, just to have some figures in hand and verify what I had been seeing on the web... The top numbers are the VE head and the bottom numbers are from a highport SR head.

Flow test was done on a completely stock SR20VE head. Machine used was a Superflow 600 test bench at 28" of H20 and low 80's temp.

SR20VE
Intake
Lift CFM
.050 49
.100 86.2
.150 122.6
.200 158.6
.250 192.5
.300 225
.350 249.2
.400 263.5
.450 272.9

Exhaust

Lift CFM
.050 46.5
.100 86
.150 118.5
.200 147
.250 171
.300 183.5
.350 188.8
.400 193
.450 196

For some added information, I've done some search on Highport heads and found these numbers...

intake test at 28in H2O, temp 88deg F
SR20DET
Lift CFM
.060 43.4
.080 60.7
.120 92.9
.180 134.5
.260 175.6
.340 192..3
.440 201.8
.460 202.3
.480 203.5
.500 203.6


exhaust test at 28in H2O, temp 95deg F

Lift CFM
.100 41.1
.140 75.0
.200 98.2
.240 106.5
.280 110.2
.360 113.0
.440 114.3
.480 114.7
.500 114.9

Jr_ss posted this on Zilvia


Per-fucking-fect!

Thank you.
2014-08-02 10:33:54
#4
may as well as keep it all together at this point for congruency.
http://www.sr20-forum.com/all-motor/15394-gtir-54c-head-flow-data.html#post201084
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top