Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: rpm cuts at 7k on sr20ve with sr16 ecu

+ Reply To Thread
Posts: 1-8 of 8
2012-10-06 05:56:43
#1
rpm cuts at 7k on sr20ve with sr16 ecu
a buddy is using a sr16ve ecu on his 20ve, he as sr16 cams

he says it revcuts at 7krpm...even when on gear

i only experienced that on mine before during idle but on gear accelerating it goes to 8200rpm...'any inputs?
2012-10-06 06:20:06
#2
ecu temperature sender problem maybe? as my 16ve has a 7k Rev cut until its up to running temp

....phone....
Last edited by happyharrysco1 on 2012-10-06 at 07-03-42.
2012-10-06 06:20:19
#3
Is his neutral sensor connected?
2012-10-06 06:32:33
#4
hmmmm will ask him to check those....any more inputs?
2012-10-06 06:39:16
#5
I would say its ether the temp or neutral sensor
2012-10-07 15:57:09
#6
or speed sensor
2012-10-07 16:01:02
#7
if the speed sensor was broken/disconnected from the ecu or dash then vvl wouldn't engage at all, because the ecu wont engage the high cams if the speed isn't above 30

....phone....
2012-10-08 14:04:53
#8
Speed sensor is ok.il ask to check the others
this has nothing to do with being obd1 or obd2 right?
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top