Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: ve aftermarket piston question

+ Reply To Thread
Posts: 1-10 of 10
2011-03-08 00:54:45
#1
ve aftermarket piston question
Who makes aftermarket piston for our ve's.....and what comp ratios are avail....what prices also...thanks guys
Last edited by DEeTer on 2011-03-08 at 00-55-41. Reason: stupid autocorrect on my droid
2011-03-08 01:27:16
#2
CP,Supertech, prob JE too.
2011-03-08 01:38:54
#3
Decide power goals then decide pistons... just sayin' 90mm+ bore is the way to go if you're going big numbers with a head to match. Stick with some compression if you're on pump and daily driving it.
2011-03-08 11:41:28
#4
Not daily driving...but want pump gas.....want to be able to drive now but be able to.boost later.....
2011-03-08 12:23:39
#5
Do a search and some reading, plenty of info out there.
2011-03-08 13:43:34
#6
CP has 9:1 and 12:1 available, in the bores 86-90, I think.
2011-03-08 15:02:29
#7
Originally Posted by DEeTer
Not daily driving...but want pump gas.....want to be able to drive now but be able to.boost later.....


u at a cross road then son.... u need to know what u want cause if u going for these brand pistons then boost is OUT. the about 600 usd ..... unless u cheddar is mas grande then u can but the 600usd 12.5:1 now n the 600usd 8.5:1 later
2011-03-09 03:03:05
#8
Is there a company out there that makes stock comp pistons.....like build the stock.comp and tap block then boost when I have money for good setup...not a junk ebay one lmao
2011-03-09 03:14:38
#9
CP can make them but if u just want the off the shelf 9.0 and 12.1 are what they have.
2011-03-09 13:47:02
#10
And can I use my n1s when I boost I here secondary cam lobe is too large for boost
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top