Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Anyone willing to make a bin for my car?

+ Reply To Thread
Posts: 1-10 of 43
2013-04-14 17:57:23
#1
Anyone willing to make a bin for my car?
The one that's on my ecu now is someone elses base with some adjustments for my setup. It still isn't quite right for cruising, and I doubt full throttle honestly. I'm wondering if any of you could go by my mods/setup and make a good bin that I could use.
2013-04-15 05:05:11
#2
What kind of ECU?
2013-04-15 06:10:41
#3
Also what kind of logging software are you using, are you logging AFR's too?
2013-04-15 07:55:03
#4
I've got one of the first calumsult realtime ecu's, and use tunerpro rt. I'm also running an aem wideband.
2013-04-15 17:19:28
#5
Why not just tune it? Make the adjustments where they are needed to get the AFRs close. Then have it tuned on a dyno.
2013-04-15 17:49:13
#6
Whats your set up?
2013-04-15 18:39:30
#7
Originally Posted by squirlz
Why not just tune it? Make the adjustments where they are needed to get the AFRs close. Then have it tuned on a dyno.



Don't have the know how honestly.

Highport motor
9.2:1 compression ratio
Brian Crower Stage 3 cams
N60 Maf
333cc ve injectors
Place Racing Cai
ssautochrome 2.5" header
3" exhaust
I'm sure there's more to list, but I'm tired lol. I'll take a nap and reply again later.
2013-04-16 01:37:20
#8
That's basically it as far as things that would affect the tune. The tune that's on it is one that someone else made before, that I modified a bit, but it's still not right. I'd upload it if I knew how to lol. Biggest issue for me right now is that I just put the mfactory final drive in the car, and cruising at 70mph the car is at 4k rpms. Here's my old sig from here that has all the cars info in it.

93 NX2000-7.75@92mph

5SPD SWAP, 1980lbs. JDM Motor, Calumsult R/T ECU, BC3 cams/gears, CP XTP 9.2:1 pistons
NX DP-100 shot, 333's, N60, Prothane Mounts, ACT Xtreme/sprung 6 puck, Fidanza
PR CAI with JWT POP, 2.5" SSAC, 3" exhaust, Outlaw Intake Spacers, OEM wires, ngk plugs
UR Pulleys, Walbro 255, ST springs with KYB's, Axis maglites
2013-04-16 01:39:22
#9
Lol didn't realize that old video was still in there.
2013-04-16 19:38:12
#10
Originally Posted by AaroNX
I've got one of the first calumsult realtime ecu's, and use tunerpro rt. I'm also running an aem wideband.


What about logging? Most of the logging software that is available to that setup is going to be too basic to be able to remote tune it well or safely. Taking it to the dyno and seeing real time power increase is the only way to go in your case.

Also start reading: http://www.sr20-forum.com/ecm-tuning/40511-beginners-guide-chipped-ecu-tuning.html
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top