Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Aem ems 2 pnp 30-6600

+ Reply To Thread
Posts: 1-10 of 25
2012-12-08 14:47:48
#1
Aem ems 2 pnp 30-6600
I want to put my aems2 on the daily for the winter.
does anyone have a tune for a.. or a base tune to start with
94 B13
stock ve w/de maf
(I also have a N62 maf available)
willing to compen$ate for the troubles..thanks
Last edited by klassickrican on 2012-12-08 at 14-56-46.
2012-12-08 17:21:50
#2
AEM doesn't require the use of a MAF. You need to disconnect that and run the MAP and Air Temp. You should be able to use a startup map from the ones already available with the software. You will also need to down the timing.
2012-12-10 01:51:54
#3
Install AEM Pro, it comes with startup calibrations. Asking for a base tune tells me that you haven't checked out the AEM Pro manual yet, you should bust through that. I learned a lot just going through all the AEM guides and install instructions.

Brent
2012-12-10 05:11:21
#4
You also need to install the CAS disc for the AEM too.
2012-12-10 05:16:02
#5
Originally Posted by BlueRB240
You also need to install the CAS disc for the AEM too.


Not true. I have run multiple cars on multiple aem ems and never needed the cas disk from aem. If you have ignition breakup over 7000 rpm then you can switch to it. I never did, but I kept my cars at 7800 redline to.

Sent from my SCH-I535 using Tapatalk 2
2012-12-10 05:20:33
#6
Wish my car was like that. I had to use the AEM CAS disc or the car wouldn't even start. RB btw.
2012-12-10 05:35:28
#7
Mine started... but i couldnt rev over like 4k without it breaking up until i had the 24:1 disc
2012-12-10 15:44:43
#8
RB is a totally different animal. But I didn't have ignition breakup at all on the B13 or B14 revving up to 7800RPM NA or Boost. The 24-1 disc does seem to smooth things out though from what everyone says. I have that disc installed now, but haven't run on it to know personally. This is the first time in 6 years with AEM EMS that I have run this disk and I did it mainly to help with my COP install.

Brent
2012-12-10 16:34:00
#9
Yeah im running the 24-1 cas wheel..I've read through the manual but I question myself to much and get nowhere/fustrated..im a very good visual/hands on learner.seeing someone doing it infront of me or seeing a vid would be great..Im (A.D.D) I guess. thanks guys
Last edited by klassickrican on 2012-12-10 at 16-36-09.
2012-12-10 17:20:52
#10
maybe this might help if you havent found it on the AEM forum yet.

+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top