Welcome to the SR20 Community Forum - The Dash.
Results 1 to 8 of 8
  1. #1
    Member
    User InfoUser ActivityThanks StatsUser Tagging StatsiTrader Feedback
    Join Date
    Nov 2011
    Posts
    238

    Default load the bin ecu on b13 basic / calum basic

    Hello everyone!

    Just want to know of what particular software I can see the bin from the basic b13 / calum basic ecu?

    I do have ecu talk consult cable..


    thanks

  2. #2
    MoreNuttyThanASquirlTurd
    User InfoUser ActivityThanks StatsUser Tagging StatsiTrader Feedback
    Join Date
    Dec 2007
    Location
    Madison, WI
    Posts
    2,714

    Default

    You will need a Moates burner to read/write to the chips. You can read the bin, modify and reburn the modified bin back on the chip. The chips need to be removed to do this.
    92 Infiniti G21 - Tuned and Running Strong!
    View The Build Here

  3. #3
    Member
    User InfoUser ActivityThanks StatsUser Tagging StatsiTrader Feedback
    Join Date
    Nov 2011
    Posts
    238

    Default

    oh i see so I need moates burner before i can read the bin..... i just thought that i could have it read directly from ecu to laptop using tunerpro....

    how about the logging? is how can i read it too?

  4. #4
    Turbo Junky
    User InfoUser ActivityThanks StatsUser Tagging StatsiTrader Feedback
    Join Date
    Dec 2007
    Location
    Raleigh NC
    Posts
    2,639

    Default

    I think you need a realtime ecu to do all that guy
    Once you go turbo you'll never go back!!! :racer:

  5. #5
    Vadministrator
    User InfoUser ActivityThanks StatsUser Tagging StatsiTrader Feedback
    Join Date
    Dec 2007
    Location
    VA
    Posts
    15,382

    Default

    For basic ECU's you make a tune with TunerPro, then you burn it to a chip with moats burner then you physically install it.

    Only two ways around it, get a dual ostrich setup or a real time ecu.
    00 G20t KH3- Loller Rocker + GT28 + 6 Speed
    01 B15 SE /PP - SR20DET + T25 + Nismo LSD For Sale
    05 Legacy GT - 5MT + Invidia Up
    04 Forester XT - 5MT + STI Up + Invidia Downpipe
    03 Spec V - Parting out Now

  6. #6
    Member
    User InfoUser ActivityThanks StatsUser Tagging StatsiTrader Feedback
    Join Date
    May 2008
    Posts
    532

    Default

    Quote Originally Posted by nibbz9999 View Post
    oh i see so I need moates burner before i can read the bin..... i just thought that i could have it read directly from ecu to laptop using tunerpro....

    how about the logging? is how can i read it too?
    You can read the bin with any/most consult software. ECUTalk (free) reads bins FAST compared to something like calumsult (free) and datascan (not free).

    logging you can do with consult programs too, but compared to other packages the amount of things you can log can be restrictive.

    Onboard logging as provided by something like the NEMU Realtime is far more convenient than having a laptop sitting on the passenger seat though.

  7. #7
    Member
    User InfoUser ActivityThanks StatsUser Tagging StatsiTrader Feedback
    Join Date
    Sep 2010
    Posts
    56

    Default

    You still need laptop for nemu rt. Unless you can telephatecally communicate with the ecu.
    Likes WRX_PWNER Liked this post
     

  8. #8
    Member
    User InfoUser ActivityThanks StatsUser Tagging StatsiTrader Feedback
    Join Date
    Jan 2010
    Posts
    1,659

    Default

    I burn chips if you need any assistance. Check out my thread, the link is in my signature.
    oh nomz nomz nomz

 

 

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Back to top