Welcome to the SR20 Community Forum - The Dash.
Results 1 to 6 of 6
  1. #1
    Member
    User Info
    Join Date: Dec 2007
    Posts: 505
    Feedback Score: 0

    Default can anyone check my bin?

    iv got a bin made up from a few others for my car, would anyone be kind enough just to have a look at it and see if they can see any problems with it?

    its for an N15 N1410 ECU

    SR20VE
    standard VE MAF and injectors
    12.5:1 pistons
    N1 cams
    Fuji manifold
    3" inlet

    cheers
    Attached Files Attached Files
    _________________________
    |.............Overnight...................|__||_
    |........Parts From Japan.YO!......|__|'|"\.__
    |_..._..____________======||_|__|...,...]
    "(@)'(@)''''''''''''''''''''''''*|(@)(@)******"(@) "

    :bigthumbup:

  2. #2
    9k rpm crew
    User Info
    Join Date: May 2008
    Posts: 4,017
    Feedback Score: 2 (100%)

    Default

    I'm not sure what kind of gas you have where u live, but if It were in my town I couldn't run that timing map at all way too much.
    95 240sx
    91 NX2000 VE
    protech-fabrication

  3. #3
    Member
    User Info
    Join Date: Dec 2007
    Posts: 505
    Feedback Score: 0

    Default

    99ron

    base timing will be set to 15deg's if that changes anything..

    are you talking all over the map or under load? i was planning on puling some out all over.. this should just be to get the car running so i can get to a dyno.
    _________________________
    |.............Overnight...................|__||_
    |........Parts From Japan.YO!......|__|'|"\.__
    |_..._..____________======||_|__|...,...]
    "(@)'(@)''''''''''''''''''''''''*|(@)(@)******"(@) "

    :bigthumbup:

  4. #4
    9k rpm crew
    User Info
    Join Date: May 2008
    Posts: 4,017
    Feedback Score: 2 (100%)

    Default

    All over the map, it's fine for stock compression. When u get the car running you will know for sure just by doing a neutral rev. It will prob ping.
    95 240sx
    91 NX2000 VE
    protech-fabrication

  5. #5
    Member
    User Info
    Join Date: Dec 2007
    Posts: 505
    Feedback Score: 0

    Default

    thanks for that.. ill pull timing all over then just to be on the safe side..
    _________________________
    |.............Overnight...................|__||_
    |........Parts From Japan.YO!......|__|'|"\.__
    |_..._..____________======||_|__|...,...]
    "(@)'(@)''''''''''''''''''''''''*|(@)(@)******"(@) "

    :bigthumbup:

  6. #6
    Member
    User Info
    Join Date: May 2010
    Location: NS, Canada
    Posts: 1,009
    Feedback Score: 7 (100%)

    Default

    Do you have an xdf to open the bin file? i tried a sr16ve and sr20ve xdf and the bin won't load
    1995 200sx SE-R
    Custom 4 to 1 header, 3" VRS exhaust, Doug Fab Custom Intake Manifold w/70mm TB, 3.5" Intake w/Stack, BC3 Cams & Springs, CS cam gears, XTD lightweight flywheel, G spec pulleys
    ~Soon to be C.O.P.~

 

 

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Back to top