Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: can anyone check my bin?

+ Reply To Thread
Posts: 1-6 of 6
2011-03-20 21:10:10
#1
can anyone check my bin?
iv got a bin made up from a few others for my car, would anyone be kind enough just to have a look at it and see if they can see any problems with it?

its for an N15 N1410 ECU

SR20VE
standard VE MAF and injectors
12.5:1 pistons
N1 cams
Fuji manifold
3" inlet

cheers
2011-03-20 22:10:27
#2
I'm not sure what kind of gas you have where u live, but if It were in my town I couldn't run that timing map at all way too much.
2011-03-21 07:39:24
#3
99ron

base timing will be set to 15deg's if that changes anything..

are you talking all over the map or under load? i was planning on puling some out all over.. this should just be to get the car running so i can get to a dyno.
2011-03-21 09:27:32
#4
All over the map, it's fine for stock compression. When u get the car running you will know for sure just by doing a neutral rev. It will prob ping.
2011-03-21 12:33:03
#5
thanks for that.. ill pull timing all over then just to be on the safe side..
2011-03-24 22:22:11
#6
Do you have an xdf to open the bin file? i tried a sr16ve and sr20ve xdf and the bin won't load
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top