Welcome to the SR20 Community Forum - The Dash.
Page 1 of 6 12345 ... LastLast
Results 1 to 40 of 236
  1. #1
    The Little SE-R Guy
    User InfoUser ActivityThanks StatsUser Tagging StatsiTrader Feedback
    Join Date
    Feb 2009
    Location
    Canton, Connecticut, United States
    Posts
    4,464

    Default JimmiSPEC Fender roller/Snap-on heat gun rental/Blue Point infrared thermometer



    I have recently purchased a fender roller and I am renting it out for other people to use so they don't have to buy everything themselves to only do it once.

    I am also including my Snap-on heat gun which will help you to not crack your paint as you roll the fenders. I would recommend using heat settings 1-2 only as above that will exceed 300 degrees.



    This professional quality fender lip rolling tool is designed to maximize the wheel well clearance when upgrading to a larger Tire & Wheel Package or when installing fender flares. Can also be used to repair wheel area damage.

    The rolling tool fits all four- and five-lug wheel hubs up to 120mm bolt circle with hubs up to 72.5mm. Includes dished washers and vehicle lug bolts. Forming arm adjusts from 14" to 22-3/4" to roll lips flat. Delrin® ball bearing system forms the fender without damaging the paint. Heavy steel powder coating.


    The rental fee is 40 dollars per vehicle and when you are done you need to pay for shipping to the next person.

    I make no warranty as to how your fenders will turn out, and cannot be held responsible for any damage caused to your vehicle by use of my tools.

    Directions: http://www.tirerack.com/images/acces.../fenderlip.jpg

    Currently NY5speed has it and Happynole will be getting it next. Please post up in list form.

    1) NY5speed (shipped to Happynole)
    2) Happynole
    3) Zer099
    4) Crim
    5) Eggman
    6) Penguin NX
    7) Sciamop
    8) Keo
    9) Uly
    10) CT locals
    11) Nismo Sentra

    Local CT guys:
    1) Little Weezy (WRX)
    2) Justin (Spec V)
    3) Mr Sentra Spec V (B13)
    Last edited by Jimithin7000; 10-19-11 at 10:51 PM.
    JimmiSPEC

    Need parts? PM me!
    SR20DEEP CT

    Quote Originally Posted by Ulysses View Post
    You are the Chuck Norris of sentras.

  2. #2
    b14+p11=<3
    User InfoUser ActivityThanks StatsUser Tagging StatsiTrader Feedback
    Join Date
    Mar 2010
    Location
    209, CA
    Posts
    2,149

    Default

    That's badass. Good stuff
    95 200sx SE-R|SR20VE|Custom 3" intake|SSAC Header|2.25in cutout|AFC NEO|DE ECU to 8450rpms|173whp & 138wtq(before cutout)|205/55/15
    92 Sentra SE-R | R.I.P.... Junked as scrap metal... :(
    2000 G20T | 132k miles | stock | Daily

    ASE Certified Technician

  3. #3
    Japanese Trans-Am
    User InfoUser ActivityThanks StatsUser Tagging StatsiTrader Feedback
    Join Date
    Dec 2007
    Location
    Florida
    Posts
    7,854

    Default

    Thats a nice thing to do for the community.Kudos to you,man.
    If I wanted to borrow it,could I pay to have it shipped down?
    We could have a fender rolling party down here!
    [COLOR="Blue"]
    Represent the DASH with pride on your ride!
    http://www.sr20-forum.com/group-buys...round-2-a.html

  4. #4
    The Little SE-R Guy
    User InfoUser ActivityThanks StatsUser Tagging StatsiTrader Feedback
    Join Date
    Feb 2009
    Location
    Canton, Connecticut, United States
    Posts
    4,464

    Default

    Quote Originally Posted by 92SentraSE-R View Post
    That's badass. Good stuff


    Thanks man are you interested?
    Last edited by Jimithin7000; 05-19-11 at 08:51 PM.
    JimmiSPEC

    Need parts? PM me!
    SR20DEEP CT

    Quote Originally Posted by Ulysses View Post
    You are the Chuck Norris of sentras.

  5. #5
    The Little SE-R Guy
    User InfoUser ActivityThanks StatsUser Tagging StatsiTrader Feedback
    Join Date
    Feb 2009
    Location
    Canton, Connecticut, United States
    Posts
    4,464

    Default

    Quote Originally Posted by eggman View Post
    Thats a nice thing to do for the community.Kudos to you,man.
    If I wanted to borrow it,could I pay to have it shipped down?
    We could have a fender rolling party down here!
    Happynole is getting this next to do his G20 and also his SE-R. Once he is done with it he can ship it to you. I am not against a fender rolling party but this is an expensive set of tools, I am actually still waiting on a thermometer I ordered to complete the set.

    I am going on the honor system here guys and all I ask is that each person who is rolling there fenders using my tools pay for it per car. You seem like a stand up guy Eggman and I don't mind doing it for you and some friends.

    I feel 40 dollars for the rental of these tools are pretty fair plus shipping to the next person.
    JimmiSPEC

    Need parts? PM me!
    SR20DEEP CT

    Quote Originally Posted by Ulysses View Post
    You are the Chuck Norris of sentras.

  6. #6
    Japanese Trans-Am
    User InfoUser ActivityThanks StatsUser Tagging StatsiTrader Feedback
    Join Date
    Dec 2007
    Location
    Florida
    Posts
    7,854

    Default

    40 plus shipping is a fair deal to me.
    Happynole may even be able to bring it to me if hes done with it by the time he makes his next trip down to FL...he says hes coming down sometime soon.
    Last edited by eggman; 05-19-11 at 09:11 PM.
    [COLOR="Blue"]
    Represent the DASH with pride on your ride!
    http://www.sr20-forum.com/group-buys...round-2-a.html

  7. #7
    The Little SE-R Guy
    User InfoUser ActivityThanks StatsUser Tagging StatsiTrader Feedback
    Join Date
    Feb 2009
    Location
    Canton, Connecticut, United States
    Posts
    4,464

    Default

    Quote Originally Posted by eggman View Post
    40 plus shipping is a fair deal to me.
    Happynole may even be able to bring it to me if hes done with it by the time he makes his next trip down to FL...sometime soon.

    Sounds like a plan I will add you to the list.
    JimmiSPEC

    Need parts? PM me!
    SR20DEEP CT

    Quote Originally Posted by Ulysses View Post
    You are the Chuck Norris of sentras.

  8. #8
    Japanese Trans-Am
    User InfoUser ActivityThanks StatsUser Tagging StatsiTrader Feedback
    Join Date
    Dec 2007
    Location
    Florida
    Posts
    7,854

    Default

    Cool,I have a heatgun,and bat that I rolled one cars fenders with.I am anxious to see the difference using the proper tool on my other car.
    [COLOR="Blue"]
    Represent the DASH with pride on your ride!
    http://www.sr20-forum.com/group-buys...round-2-a.html

  9. #9
    The People's Mod
    User InfoUser ActivityThanks StatsUser Tagging StatsiTrader Feedback
    Join Date
    Dec 2007
    Location
    Columbia, SC
    Posts
    16,048

    Default

    We own one of these here, and I used it to do my rear fenders. It's the only way to go IMO. What's with the TireRack sticker on an Eastwood tool? =]

  10. #10
    The Little SE-R Guy
    User InfoUser ActivityThanks StatsUser Tagging StatsiTrader Feedback
    Join Date
    Feb 2009
    Location
    Canton, Connecticut, United States
    Posts
    4,464

    Default

    Quote Originally Posted by BenFenner View Post
    We own one of these here, and I used it to do my rear fenders. It's the only way to go IMO. What's with the TireRack sticker on an Eastwood tool? =]
    I'm not sure, I purchased the tool from Tire Rack I assume maybe it was just a rebadge?
    JimmiSPEC

    Need parts? PM me!
    SR20DEEP CT

    Quote Originally Posted by Ulysses View Post
    You are the Chuck Norris of sentras.

  11. #11
    B14 Too Many
    User InfoUser ActivityThanks StatsUser Tagging StatsiTrader Feedback
    Join Date
    Jul 2008
    Location
    South Florida
    Posts
    952

    Default

    That'd not a bad deal/idea at all, if I was still into big wheels/really low cars I would definitely go for it, my gf has been wanting big rims on her gallant it would be a year before that comes I might need to use it eventually,

    It seems you are pretty trustworthy of the forum members but I have never seen a tool rental that didn't have some kind of deposit put down, it probably would be easy to do if you ever have problems with the tool renting process
    -1993 sentra XE (crashed drove for 10 months then sold for $100 pic 1 pic2)
    -1995 200sx se (old daily)- new timing chain in progress- For Sale $1300obo
    -1996 200sx se-r - For Sale $1300obo For Sale Thread
    -1998 Sentra Se (new DD)
    Liuspeed HID Projector Install

  12. #12
    Member
    User InfoUser ActivityThanks StatsUser Tagging StatsiTrader Feedback
    Join Date
    Dec 2009
    Location
    scotch plains, nj
    Posts
    409

    Default

    add me onto the list to use the fender roller. hopefully i get it when it's my day off from work =D
    Marsh Tuned SR20DE+T powered '88 Nissan Pulsar NX SE
    my build thread

    "It doesn't matter if you win or lose, as long as you look good doing it"

  13. #13
    The Little SE-R Guy
    User InfoUser ActivityThanks StatsUser Tagging StatsiTrader Feedback
    Join Date
    Feb 2009
    Location
    Canton, Connecticut, United States
    Posts
    4,464

    Default

    Quote Originally Posted by penguin nx View Post
    add me onto the list to use the fender roller. hopefully i get it when it's my day off from work =D
    Added you to the list.
    JimmiSPEC

    Need parts? PM me!
    SR20DEEP CT

    Quote Originally Posted by Ulysses View Post
    You are the Chuck Norris of sentras.

  14. #14
    building...
    User InfoUser ActivityThanks StatsUser Tagging StatsiTrader Feedback
    Join Date
    May 2008
    Posts
    2,395

    Default

    Great tool, easy to use see here and en-route to happynole now.

  15. #15
    The Little SE-R Guy
    User InfoUser ActivityThanks StatsUser Tagging StatsiTrader Feedback
    Join Date
    Feb 2009
    Location
    Canton, Connecticut, United States
    Posts
    4,464

    Default

    Quote Originally Posted by ny5speed View Post
    Great tool, easy to use see here and en-route to happynole now.
    Thank you sir, I will let Happynole know.
    JimmiSPEC

    Need parts? PM me!
    SR20DEEP CT

    Quote Originally Posted by Ulysses View Post
    You are the Chuck Norris of sentras.

  16. #16
    Red Emblem
    User InfoUser ActivityThanks StatsUser Tagging StatsiTrader Feedback
    Join Date
    Dec 2007
    Location
    North East GA
    Posts
    712

    Default

    Snap, I wish I would have seen this earlier I need to get in on it and I'm like an hour away from Joe (Happynole).
    I'm back at work in Antarctica for the season. If you need anything I am selling or a step-down harness please be patient as we do not get access to the internet often.

    If you’re curious about the field camp I'm at this year Google "Pine Island Glacier" or check out the weather cams we have set up there (Cam A & Cam B). Yes, I know its nothing but snow and flat white, welcome to my world...

    ~J

  17. #17
    The Little SE-R Guy
    User InfoUser ActivityThanks StatsUser Tagging StatsiTrader Feedback
    Join Date
    Feb 2009
    Location
    Canton, Connecticut, United States
    Posts
    4,464

    Default

    Quote Originally Posted by zer099 View Post
    Snap, I wish I would have seen this earlier I need to get in on it and I'm like an hour away from Joe (Happynole).
    The fender roller has either just gotten to Joe, or arriving soon. You still have time would you like me to add you to the list?
    JimmiSPEC

    Need parts? PM me!
    SR20DEEP CT

    Quote Originally Posted by Ulysses View Post
    You are the Chuck Norris of sentras.

  18. #18
    Red Emblem
    User InfoUser ActivityThanks StatsUser Tagging StatsiTrader Feedback
    Join Date
    Dec 2007
    Location
    North East GA
    Posts
    712

    Default

    Quote Originally Posted by Jimithin7000 View Post
    The fender roller has either just gotten to Joe, or arriving soon. You still have time would you like me to add you to the list?
    Yes please! You want to get in contact with Joe or want me to try? Also: who/where am I sending payment too?
    I'm back at work in Antarctica for the season. If you need anything I am selling or a step-down harness please be patient as we do not get access to the internet often.

    If you’re curious about the field camp I'm at this year Google "Pine Island Glacier" or check out the weather cams we have set up there (Cam A & Cam B). Yes, I know its nothing but snow and flat white, welcome to my world...

    ~J

  19. #19
    The Little SE-R Guy
    User InfoUser ActivityThanks StatsUser Tagging StatsiTrader Feedback
    Join Date
    Feb 2009
    Location
    Canton, Connecticut, United States
    Posts
    4,464

    Default

    Quote Originally Posted by zer099 View Post
    Yes please! You want to get in contact with Joe or want me to try? Also: who/where am I sending payment too?
    I just sent Joe a text message, once he is done with it you are welcome to use it. Pickup/delivery options are between the 2 of you, when you are done with it you are responsible for paying shipping to Eggman.

    40 dollars is payable to me via Paypal Jimithin7000@hotmail.com just please make sure to include the Paypal fee.

    Please do not send me payment until you collect the roller and heat gun from Joe.
    JimmiSPEC

    Need parts? PM me!
    SR20DEEP CT

    Quote Originally Posted by Ulysses View Post
    You are the Chuck Norris of sentras.

  20. #20
    Red Emblem
    User InfoUser ActivityThanks StatsUser Tagging StatsiTrader Feedback
    Join Date
    Dec 2007
    Location
    North East GA
    Posts
    712

    Default

    Check. Thank you sir!
    I'm back at work in Antarctica for the season. If you need anything I am selling or a step-down harness please be patient as we do not get access to the internet often.

    If you’re curious about the field camp I'm at this year Google "Pine Island Glacier" or check out the weather cams we have set up there (Cam A & Cam B). Yes, I know its nothing but snow and flat white, welcome to my world...

    ~J

  21. #21
    Member
    User InfoUser ActivityThanks StatsUser Tagging StatsiTrader Feedback
    Join Date
    Mar 2008
    Posts
    62

    Default

    I'll take the #5 spot...

  22. #22
    The Little SE-R Guy
    User InfoUser ActivityThanks StatsUser Tagging StatsiTrader Feedback
    Join Date
    Feb 2009
    Location
    Canton, Connecticut, United States
    Posts
    4,464

    Default

    Quote Originally Posted by sciamop View Post
    I'll take the #5 spot...
    Err make that number 6 as I had not added Zer099 at the time.

    When the time comes for it to come to you the person shipping to you will ask for your address.
    JimmiSPEC

    Need parts? PM me!
    SR20DEEP CT

    Quote Originally Posted by Ulysses View Post
    You are the Chuck Norris of sentras.

  23. #23
    building...
    User InfoUser ActivityThanks StatsUser Tagging StatsiTrader Feedback
    Join Date
    May 2008
    Posts
    2,395

    Default

    Also, I went out and got a reusable tote for shipping this around so you all don't have to go hunting for sturdy for sturdy boxes or anything.

  24. #24
    The Little SE-R Guy
    User InfoUser ActivityThanks StatsUser Tagging StatsiTrader Feedback
    Join Date
    Feb 2009
    Location
    Canton, Connecticut, United States
    Posts
    4,464

    Default

    Quote Originally Posted by ny5speed View Post
    Also, I went out and got a reusable tote for shipping this around so you all don't have to go hunting for sturdy for sturdy boxes or anything.
    Thank you sir, I am going to probably ship out the infrared thermometer out to Happynole next week so that he can include it in the tote.
    JimmiSPEC

    Need parts? PM me!
    SR20DEEP CT

    Quote Originally Posted by Ulysses View Post
    You are the Chuck Norris of sentras.

  25. #25
    Japanese Trans-Am
    User InfoUser ActivityThanks StatsUser Tagging StatsiTrader Feedback
    Join Date
    Dec 2007
    Location
    Florida
    Posts
    7,854

    Default

    man this is awaesome,Jimmy the tool pimp.
    what other tools can you whore out to us?
    LOL

    Seriously,looking forward to getting this.Should I just go ahead and send payment now,or wait until it in enroute?
    [COLOR="Blue"]
    Represent the DASH with pride on your ride!
    http://www.sr20-forum.com/group-buys...round-2-a.html

  26. #26
    The Little SE-R Guy
    User InfoUser ActivityThanks StatsUser Tagging StatsiTrader Feedback
    Join Date
    Feb 2009
    Location
    Canton, Connecticut, United States
    Posts
    4,464

    Default

    Quote Originally Posted by eggman View Post
    man this is awaesome,Jimmy the tool pimp.
    what other tools can you whore out to us?
    LOL

    Seriously,looking forward to getting this.Should I just go ahead and send payment now,or wait until it in enroute?
    What else are you looking for? My toolbox is pretty big... although it is also getting pretty full.

    Once Zer099 is done with it he will either ship it to you or deliver it himself. I'm not sure how far you guys are from each other. Sorry for "bumping" you but it appears Zer099 is only 1 hour away from Joe so it makes sense for him to get it next.

    Once you recieve all the tools you can go ahead and send payment.
    Last edited by Jimithin7000; 05-27-11 at 10:59 PM.
    JimmiSPEC

    Need parts? PM me!
    SR20DEEP CT

    Quote Originally Posted by Ulysses View Post
    You are the Chuck Norris of sentras.

  27. #27
    The Little SE-R Guy
    User InfoUser ActivityThanks StatsUser Tagging StatsiTrader Feedback
    Join Date
    Feb 2009
    Location
    Canton, Connecticut, United States
    Posts
    4,464

    Default Stop that rear rub

    I am cross posting this from Randy's thread

    Quote Originally Posted by ny5speed View Post
    I got around to rolling the fenders today. Gotta thank Jimmi for making this tool available to the community, very cool.

    After a bit of reconfiguring to get the tool onto a car as small as ours it looks like this:




    I used the heatgun to help aviod paint cracking and worked 5-6" sections at a time. If you remember my bumpers from last year you know my paint is especially brittle but I ended up with very little cracking.



    Very easy tool to use.

    before:


    after:


    Tomorrow I'm going to go out and find a rigid, reusable shipping container and get everything ready to head to happynole.
    Thanks to Randy for taking measurements so everyone can see how this will help the rear rub under hard cornering!
    JimmiSPEC

    Need parts? PM me!
    SR20DEEP CT

    Quote Originally Posted by Ulysses View Post
    You are the Chuck Norris of sentras.

  28. #28
    Keo
    Keo is offline
    Horse Beater!
    User InfoUser ActivityThanks StatsUser Tagging StatsiTrader Feedback
    Join Date
    Dec 2007
    Location
    Maryland
    Posts
    8,961

    Default

    ooohhhh, i want on the list!
    Quote Originally Posted by Cliff View Post
    You are now known as "1 Up Chuck".
    for a good time call
    410-347-1488 (rejection hotline!)

  29. #29
    The Little SE-R Guy
    User InfoUser ActivityThanks StatsUser Tagging StatsiTrader Feedback
    Join Date
    Feb 2009
    Location
    Canton, Connecticut, United States
    Posts
    4,464

    Default

    Quote Originally Posted by Keo View Post
    ooohhhh, i want on the list!
    I added you to the list Keo, once it gets back into the NY/NJ area it will go out to you.

    You should see in anyone else in your area wants to rent it after you!
    JimmiSPEC

    Need parts? PM me!
    SR20DEEP CT

    Quote Originally Posted by Ulysses View Post
    You are the Chuck Norris of sentras.

  30. #30
    Japanese Trans-Am
    User InfoUser ActivityThanks StatsUser Tagging StatsiTrader Feedback
    Join Date
    Dec 2007
    Location
    Florida
    Posts
    7,854

    Default

    Quote Originally Posted by Jimithin7000 View Post
    What else are you looking for? My toolbox is pretty big... although it is also getting pretty full.

    Once Zer099 is done with it he will either ship it to you or deliver it himself. I'm not sure how far you guys are from each other. Sorry for "bumping" you but it appears Zer099 is only 1 hour away from Joe so it makes sense for him to get it next.

    Once you recieve all the tools you can go ahead and send payment.
    I am in no big hurry,so the "bump" is no big deal...Just dont bump me into next year

    I cant really think of any other tools I need at the moment..but I will keep you in mind.
    I have quite the tool collection myself
    [COLOR="Blue"]
    Represent the DASH with pride on your ride!
    http://www.sr20-forum.com/group-buys...round-2-a.html

  31. #31
    The Little SE-R Guy
    User InfoUser ActivityThanks StatsUser Tagging StatsiTrader Feedback
    Join Date
    Feb 2009
    Location
    Canton, Connecticut, United States
    Posts
    4,464

    Default

    Quote Originally Posted by eggman View Post
    I am in no big hurry,so the "bump" is no big deal...Just dont bump me into next year

    I cant really think of any other tools I need at the moment..but I will keep you in mind.
    I have quite the tool collection myself
    Cool man I really appreciate you understanding. I won't bump you into next year by any means haha.

    If anyone else wants in please let me know, otherwise when it gets through this round it will come home, roll some fenders locally and then be sent back out.

    I kind of have a back log of people wanting to use it here but they aren't as important as you guys.

    Local peeps

    1 VW GTI (slammed)
    1 03 Spec V (Ricer)
    JimmiSPEC

    Need parts? PM me!
    SR20DEEP CT

    Quote Originally Posted by Ulysses View Post
    You are the Chuck Norris of sentras.

  32. #32
    Administrator
    User InfoUser ActivityThanks StatsUser Tagging StatsiTrader Feedback
    Join Date
    Dec 2007
    Location
    Marietta/Atlanta, GA
    Posts
    1,140

    Default

    Yo! Add me to the list please! Just let me know when and where to send the $40!

    Thanks!
    Stephen
    SR20Deuce [Atlanta Chapter]

    1990 2+2 TwinTurbo 300zx
    '71 CB175 - '74 CB350F - '99 GS500e - '00 Aprilia RS50 / KX125 hybrid

    Engine Removal Howto
    1.6 to 2.0 Engine swap Howto

  33. #33
    The Little SE-R Guy
    User InfoUser ActivityThanks StatsUser Tagging StatsiTrader Feedback
    Join Date
    Feb 2009
    Location
    Canton, Connecticut, United States
    Posts
    4,464

    Default

    Quote Originally Posted by Crim View Post
    Yo! Add me to the list please! Just let me know when and where to send the $40!

    Thanks!
    Stephen
    I added you right after EGGMAN.
    JimmiSPEC

    Need parts? PM me!
    SR20DEEP CT

    Quote Originally Posted by Ulysses View Post
    You are the Chuck Norris of sentras.

  34. #34
    Enjoying the Ride
    User InfoUser ActivityThanks StatsUser Tagging StatsiTrader Feedback
    Join Date
    Dec 2007
    Location
    Georgia
    Posts
    2,976

    Default

    For ease of not shipping back and forth to Atl, I would suggest letting Crim jump in as he is an Atlanta guy as well. Heck, if these guys can clear a night this week, we can have a fender rollin meet at my house!
    Life is a Journey, Enjoy the Ride

    http://youtu.be/ZbewlRlMWLU

    SR20DeepSouth

  35. #35
    Administrator
    User InfoUser ActivityThanks StatsUser Tagging StatsiTrader Feedback
    Join Date
    Dec 2007
    Location
    Marietta/Atlanta, GA
    Posts
    1,140

    Default

    Quote Originally Posted by happynole View Post
    Heck, if these guys can clear a night this week, we can have a fender rollin meet at my house!
    Or I could drive down to your place and pickup the roller and then ship it along to the next guy. I'd be totally down for having a 'fender roll party', but my Z is currently w/o an exhaust, waiting on the piping to show up so I can fabricate the rear section. Most of all I don't want to hold up the list.

    Whatever works, I don't mind waiting my place in turn.
    SR20Deuce [Atlanta Chapter]

    1990 2+2 TwinTurbo 300zx
    '71 CB175 - '74 CB350F - '99 GS500e - '00 Aprilia RS50 / KX125 hybrid

    Engine Removal Howto
    1.6 to 2.0 Engine swap Howto

  36. #36
    The Little SE-R Guy
    User InfoUser ActivityThanks StatsUser Tagging StatsiTrader Feedback
    Join Date
    Feb 2009
    Location
    Canton, Connecticut, United States
    Posts
    4,464

    Default

    I just updated this list, Eggman if you have a problem with it going to Crim before you please PM me.

    I don't want to piss anyone off, I am just trying to help out the community.
    JimmiSPEC

    Need parts? PM me!
    SR20DEEP CT

    Quote Originally Posted by Ulysses View Post
    You are the Chuck Norris of sentras.

  37. #37
    Axle Smasher
    User InfoUser ActivityThanks StatsUser Tagging StatsiTrader Feedback
    Join Date
    Jan 2009
    Location
    NY
    Posts
    1,049

    Default

    let me know when this beast is back in ct might have to do the car now that i got rid of the 4x4 stance

  38. #38
    Japanese Trans-Am
    User InfoUser ActivityThanks StatsUser Tagging StatsiTrader Feedback
    Join Date
    Dec 2007
    Location
    Florida
    Posts
    7,854

    Default

    Quote Originally Posted by Jimithin7000 View Post
    I just updated this list, Eggman if you have a problem with it going to Crim before you please PM me.

    I don't want to piss anyone off, I am just trying to help out the community.
    No problem,guys.
    Joe makes a good point about shipping it back and forth.
    I am not in a big hurry...just glad to get in on it.

    anybody else near Atlanta...get in while the gettins good
    [COLOR="Blue"]
    Represent the DASH with pride on your ride!
    http://www.sr20-forum.com/group-buys...round-2-a.html

  39. #39
    2 Legit 2 Quit!
    User InfoUser ActivityThanks StatsUser Tagging StatsiTrader Feedback
    Join Date
    Dec 2007
    Location
    S. Florida....dirty south.
    Posts
    5,164

    Default

    This is an awesome idea...

    Will b14s benefit as much a b13 from this tool?
    Wayne
    iTrader FeedBack
    I ♥ VVL




  40. #40
    Administrator
    User InfoUser ActivityThanks StatsUser Tagging StatsiTrader Feedback
    Join Date
    Dec 2007
    Location
    Marietta/Atlanta, GA
    Posts
    1,140

    Default

    Quote Originally Posted by Wayne View Post
    This is an awesome idea...

    Will b14s benefit as much a b13 from this tool?
    It'll benefit anyone who (barely) rubs their tires on their fenders
    SR20Deuce [Atlanta Chapter]

    1990 2+2 TwinTurbo 300zx
    '71 CB175 - '74 CB350F - '99 GS500e - '00 Aprilia RS50 / KX125 hybrid

    Engine Removal Howto
    1.6 to 2.0 Engine swap Howto

 

 
Page 1 of 6 12345 ... LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Back to top