Camber Plates !? - SR20 Community Forum

SanDiegoSRSX · 02-26-2008, 01:23 AM

Does anyone know any sites that sell Camber Plates for a b14 at a
"good price" Thanks

Keo · 02-26-2008, 07:58 AM

for the B14 they go for $150. if you want cheaper good luck

SanDiegoSRSX · 02-26-2008, 09:59 AM

alright thanks that's what I thought they go for. How do they affect the ride comfort
wise?

SHigSpeed · 02-26-2008, 10:36 AM

The $150 under the bodywork camber plates won't really affect the ride comfort normally other than some more road noise into the cabin due to the pillowball mount, however they DO reduce suspension travel by about 3/4" because of the design. Due to this, don't go too low or your bottom out more unless you have shortened struts.

The Ground Control camber caster plates, OTOH, increase travel and adjustability but only work on coilovers and cost $350.

_SHig

SanDiegoSRSX · 02-26-2008, 07:57 PM

alright thanks, since they don't affect comfort that much I think I'm going to run my
Tein Basics without camber plates.

cause4alarm · 02-26-2008, 11:45 PM

do the plates before doing egg bolts. and do the caster bushings while you're at it.

02-26-2008, 01:23 AM	#1 (permalink)
SanDiegoSRSX Member Join Date: Dec 2007 iTrader: (0)	Camber Plates !? Does anyone know any sites that sell Camber Plates for a b14 at a "good price" Thanks __________________ 98' 200sx SE-R San Diego 619 Area

02-26-2008, 09:59 AM	#3 (permalink)
SanDiegoSRSX Member Join Date: Dec 2007 iTrader: (0)	alright thanks that's what I thought they go for. How do they affect the ride comfort wise? __________________ 98' 200sx SE-R San Diego 619 Area

02-26-2008, 07:57 PM	#5 (permalink)
SanDiegoSRSX Member Join Date: Dec 2007 iTrader: (0)	alright thanks, since they don't affect comfort that much I think I'm going to run my Tein Basics without camber plates. __________________ 98' 200sx SE-R San Diego 619 Area

02-26-2008, 11:45 PM	#6 (permalink)
cause4alarm MEMBER SINCE 2002 Join Date: Dec 2007 Location: lil rhody iTrader: (0)	do the plates before doing egg bolts. and do the caster bushings while you're at it. __________________ i go through girls like i go through tires

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

02-26-2008, 10:36 AM	#4 (permalink)
SHigSpeed VE Racer, P10 Cruiser Join Date: Dec 2007 Location: Rocklin, CA iTrader: (2)	The $150 under the bodywork camber plates won't really affect the ride comfort normally other than some more road noise into the cabin due to the pillowball mount, however they DO reduce suspension travel by about 3/4" because of the design. Due to this, don't go too low or your bottom out more unless you have shortened struts. The Ground Control camber caster plates, OTOH, increase travel and adjustability but only work on coilovers and cost $350. _SHig