NX2000 Extended lugs...where?? - SR20 Community Forum

91B13DET · 02-08-2008, 11:16 AM

Ight ladies and gentlemen, Recently I have picked up a egg and am gettin some shoes on her here soon, I want that extended lug look as well as their use, so with that being said I need em. Anyone know where I can get them for a Nx2000....? I have searched and can't find S**T. Links would be great

Thanks guys....

Chris

Keo · 02-08-2008, 11:30 AM

anything for the sentra will work, Nismo and ARP are the popular ones. search the other forum on the part #

91B13DET · 02-08-2008, 12:45 PM

cool. Thanks keo...

Chris

Dbarnett88 · 02-08-2008, 02:06 PM

decided on what kind of wheels your going for? what size?

javierb14 · 02-08-2008, 02:31 PM

i put ARPs on my b13. i used EVOVIII studs out back and the front has ARPs that are supplied with the driveshaft shop axle kit. i also tack welded them to prevent them from spinning in case the splines strip.

ManuelGA · 02-08-2008, 11:16 PM

Chris, why don't you ask Greg???

91B13DET · 02-08-2008, 11:20 PM

Greg stock the nismo ones right... I seen that the ARP's are so much cheaper... Yea i am going to be putting on 16" Gunmetal Rota Grids on it with Azenis 615's

Chris

Pretty White · 02-09-2008, 06:05 PM

Howgood are the APR's? I would be afraid of anything outside of Nismo's to strip and spin in the hub. I had a verrrrrrrry bad experience with the H&R studs that came with their spacers. Lets just say I drove to the tire shop with a wobbly wheel at 2 mph.

91B13DET · 02-11-2008, 10:57 AM

Everyone says and post about how much better they are than the nismo's becuase of price and how they don't rust like the nismo's do. Unno though personally becuase I haven't had either, I will prolly be going with the ARP's.

Chris

Pretty White · 02-11-2008, 12:58 PM

Nismos rust? New to me. I have them and they are no different that factory lug nuts but longer.

91B13DET · 02-11-2008, 03:13 PM

Ya unno bro, Just what I've heard. =/

Chris

Sentrixx · 02-11-2008, 08:40 PM

Are you going with any wheel spacers?

91B13DET · 02-11-2008, 09:30 PM

Yes I prolly will be running spacers also with my wheels, I am gettin 16x7 rota grids with a 205/50 wide tire and rolling the fenders for that flush look. not yet sure on what MM i will need for the spacers.

Chris

insane imports · 02-11-2008, 10:25 PM

I have the nismo long studs and dont have any rusting problems. I am running a 1/2 in spacer in the rear to clear the spring pearch.

make sure they fit very snug when you put them in. Mine didnt in the rear when i installed new rear hubs/bearings, so i welded them in.

Re-spect · 02-12-2008, 12:41 AM

I ahve the ARP for the Subaru on both of my cars all around, very expensive.They were like 5 dollars each

02-08-2008, 11:16 AM	#1 (permalink)
91B13DET Boostin Hard.. Join Date: Dec 2007 Location: Everett, Wa iTrader: (6)	NX2000 Extended lugs...where?? Ight ladies and gentlemen, Recently I have picked up a egg and am gettin some shoes on her here soon, I want that extended lug look as well as their use, so with that being said I need em. Anyone know where I can get them for a Nx2000....? I have searched and can't find S**T. Links would be great Thanks guys.... Chris __________________ 92 Nx2k >< With some thangs...

02-08-2008, 12:45 PM	#3 (permalink)
91B13DET Boostin Hard.. Join Date: Dec 2007 Location: Everett, Wa iTrader: (6)	cool. Thanks keo... Chris __________________ 92 Nx2k >< With some thangs...

02-08-2008, 02:06 PM	#4 (permalink)
Dbarnett88 NX-addict Join Date: Dec 2007 Location: Seattle/Tacoma, WA iTrader: (2)	decided on what kind of wheels your going for? what size? __________________ MY P.O.S (I <3 MY NX2000) W10 SR20DET // BC Stage 2 Cams// Stock Boost... DYNO (dynapack 4000 hub dyno) 219 WHP @ 6,360 RPM 210 WTQ @ 4,940 RPM

02-08-2008, 02:31 PM	#5 (permalink)
javierb14 SR20 Newbie Join Date: Jan 2008 Location: AZ iTrader: (0)	i put ARPs on my b13. i used EVOVIII studs out back and the front has ARPs that are supplied with the driveshaft shop axle kit. i also tack welded them to prevent them from spinning in case the splines strip. __________________ www.full-race.com

02-08-2008, 11:16 PM	#6 (permalink)
ManuelGA Mexican SR20'er Join Date: Dec 2007 Location: Tequisquiapan, Qro, MEX iTrader: (0)	Chris, why don't you ask Greg??? __________________ ---->>>English Spoken / Se habla español<<<---- 2000 SR20DE B14 Sentra / 2004 QR25DE T30 X-Trail / 2008 CX-7 AWD

02-08-2008, 11:20 PM	#7 (permalink)
91B13DET Boostin Hard.. Join Date: Dec 2007 Location: Everett, Wa iTrader: (6)	Greg stock the nismo ones right... I seen that the ARP's are so much cheaper... Yea i am going to be putting on 16" Gunmetal Rota Grids on it with Azenis 615's Chris __________________ 92 Nx2k >< With some thangs...

02-11-2008, 10:57 AM	#9 (permalink)
91B13DET Boostin Hard.. Join Date: Dec 2007 Location: Everett, Wa iTrader: (6)	Everyone says and post about how much better they are than the nismo's becuase of price and how they don't rust like the nismo's do. Unno though personally becuase I haven't had either, I will prolly be going with the ARP's. Chris __________________ 92 Nx2k >< With some thangs...

02-11-2008, 03:13 PM	#11 (permalink)
91B13DET Boostin Hard.. Join Date: Dec 2007 Location: Everett, Wa iTrader: (6)	Ya unno bro, Just what I've heard. =/ Chris __________________ 92 Nx2k >< With some thangs...

02-11-2008, 08:40 PM	#12 (permalink)
Sentrixx Helping Noobs since 02' Join Date: Dec 2007 Location: Dirty South, FL iTrader: (3)	Are you going with any wheel spacers? __________________ Wayne EEA-Western Chapter - Sgt. Covert Ops Cloud White 99 Se-L http://www.cardomain.com/ride/805495

02-11-2008, 09:30 PM	#13 (permalink)
91B13DET Boostin Hard.. Join Date: Dec 2007 Location: Everett, Wa iTrader: (6)	Yes I prolly will be running spacers also with my wheels, I am gettin 16x7 rota grids with a 205/50 wide tire and rolling the fenders for that flush look. not yet sure on what MM i will need for the spacers. Chris __________________ 92 Nx2k >< With some thangs...

02-11-2008, 10:25 PM	#14 (permalink)
insane imports sr20 gear head Join Date: Jan 2008 Location: wisconsin iTrader: (3)	I have the nismo long studs and dont have any rusting problems. I am running a 1/2 in spacer in the rear to clear the spring pearch. make sure they fit very snug when you put them in. Mine didnt in the rear when i installed new rear hubs/bearings, so i welded them in. __________________ 93 electric blue nx2000 with a couple mods 91 g20 5spd(dd) 202k still going strong 99 maxima se 5spd, I/H/E,hid's,blizzaks 06 suzuki ltz400 not stock

02-12-2008, 12:41 AM	#15 (permalink)
Re-spect NOTRAILAHO Join Date: Dec 2007 Location: queens iTrader: (4)	I ahve the ARP for the Subaru on both of my cars all around, very expensive.They were like 5 dollars each __________________ If ya want JDM,go da F_ck to OSAKA

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode