Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: 1994 Limited Edition trunk lid on 93' Ser.

+ Reply To Thread
Posts: 1-3 of 3
2012-10-27 21:14:51
#1
1994 Limited Edition trunk lid on 93' Ser.
Yesterday we put a 94 limited trunk on a 93 ser, little did we know when we purchased it from our local junkyard that the taillights on the 93' are recessed. Meaning the taillights were about 4 inches thick and the trunk lid had no cut outs for the recessed lights. Meaning we had to do some modifications. So we took everything apart & off the 93' and started to measure the size of the cut outs off of the 93' to draw onto the 94'. We used a Dremel and screw (to scratch the surface so we know where to cut the 3 bolts that hold the taillights had to hold them on, also the key entry for the trunk, it has to bolts that need to be cut out.). Also the key entry needed to be expanded, using the dremel we did so. After all was measured, scratched, & cut the taillights fell right into place, & the gap on each side between the lights above the license plate was completely even. The harness's all plugged in & the key entry works magnificent. We have pictures but have yet to upload them. Will update tomorrow with photos.
2012-10-28 20:41:07
#2
you know they sell pencils or markers so you dont have to use a screw to make marks right?
2012-10-29 01:47:10
#3
yeah well we obviously weren't prepared to do all the modifications when we bought the trunk, we did it as soon as we got it.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top