Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: 91 sentra ser head gasket problem

+ Reply To Thread
Posts: 1-10 of 10
2012-09-10 00:46:46
#1
91 sentra ser head gasket problem
Okay blew a head gasket on my jdm sr20de b13 Ser.
I replace the head gasket with a 1.7mm. Bolt everything up etc Timing is dead on.
Problem
I'm getting spark and fuel into my injector but no into the spark plugs?
my spark plug is dry it doesn't even have the smell of fuel. I crank and crank but plugs are dry. I'm confused I done five head gasket but never had a problem like this. Help please!!!!
2012-09-10 01:09:06
#2
Sounds Weird. How did you test spark and injector pulse ?
2012-09-10 01:20:49
#3
pull the plugs out use a flathead into the plug also use a spark plugs autozone tester. Fuel pump prime I also check the return and feed line on the fuel it has fuel running inside the hose. I'm lost
2012-09-10 01:51:26
#4
Are you sure you got the fuel feed and return to the right port? Swap it around and report back
2012-09-10 01:54:34
#5
Okay will let you know tomorrow
2012-09-11 02:16:34
#6
I swap the feed and return gas line nothing happen still no getting fuel into the spark plugs
2012-09-11 10:00:27
#7
Remove one of the injector and prime the pump to see if it has spray.
Last edited by Dave_SR20 on 2012-09-11 at 19-17-18.
2012-09-12 02:52:33
#8
injector doesn't spray , we'll keep you post when the car do run.
2012-09-12 23:03:08
#9
Dumb question - how long was the car sitting (assuming awhile if you needed to change the head gasket) - is there fuel in the tank?
2012-09-12 23:09:33
#10
Not long about two days before I started working on the car. drove the car into my garage before working on the head gasket.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top