Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Why does consult not work?

+ Reply To Thread
Posts: 1-3 of 3
2010-04-26 04:29:27
#1
Why does consult not work?
I have a B14 CalumRT v1 in a 2002 G20 using a 99 G20 engine harness with a VE.
Using the USB, I can upload and download bins with various software (tunerpro, etc) but I can not get any realtime info or consult functions (nistune, calumsult, etc) to work through the USB.

Any ideas?
2010-04-26 04:49:47
#2
I'm assume the 4 wires pointed to by the arrows are for consult.

This is what I see in the ECU :




The resistors should be O2 and EGR delete I'd imagine.
2010-05-04 09:10:19
#3
The ECU works since I tested it in another car.
Now I just need to get the wiring correct.

So I was looking at the wires while having both the 99 and 02 FSM open.

These 3 wires are the main (non-ground) consult wires from the 99 engine harness:


From there they come out of the loom and go to this harness:




But the next harness it meets with is missing 2 of the 3 wires:




I assume from there it makes it way over to the Data Link Connector (EC-631 M10).
I didn't bother following it any further since it hit a dead end right there.

I could just hijack the wires right there and take them over to the OBDII plug, but I don't know which pins to put them in.
Everything I see for consult pin layouts look like this:
http://i283.photobucket.com/albums/kk303/alfsentra/consultcarplug.jpg

That doesn't help out anyone with a 2000+ car.
I guess I could down grade the plug to the old gray consult plug...
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top