Thread: TPS settings

Hey guys, i was hoping someone can help me figure out what my tps should read when i check it. also to make sure, can you also tell me what settings the volt meter should be at? thanks for your help!

I need to know what it reads on closed throttle and at wide open throttle.

can i please get some help??

closed throttle should be no less than .5V and WOT should be no more than 4.5V and smooth transition on a graph meter the whole way...no drop off/spikes

the wiring on b13 are diferent on trotle read from Up to down.. that if you do a swap.. need to pin the plug.. That IF you have a B13 with a GTi-R Swap

ok..thanks for your help guys. really appreciated!

throttle closed at .37-.45 and 3.92-4.02 volts WOT. Did you figure out why its reading backwards?

okay, thanks for all your help, now i need to know how to "pin the wire," can I get some help there?? Remember, im a newb..lol so please go from the begining!

Alright, flip the two outside wires on the tps and then check it. Leave the center one alone. Im gonna come over this weekend