Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: pulsar hnn15. swap sr20vet

+ Reply To Thread
Posts: 1-10 of 46
2010-09-18 05:21:50
#1
pulsar hnn15. swap sr20vet
Hi, I'm from Russia
pulsar hnn15, 4wd
sr20vet
mt
[img]http://per_s.users.photofile.ru/photo/per_s/96374260/xlarge/120030725.jpg[/img]

I have a question. Is it possible to remake the hub under five pins 5x100?

[img]http://per_s.users.photofile.ru/photo/per_s/96328437/xlarge/119003024.jpg[/img]

excuse me for the translation please
2010-09-18 08:48:26
#2
Welcome! Excellent conversion. Do you have a picture of the outside of the car?

Redrill to 5x100 is possible, yes, but would need an engineer to do it as it must be accurate. I have not seen it done before though.

What ECU / Computer are you using for this motor ?
2010-09-18 09:36:00
#3
Yes. There are many photos of the car. you are interesting to look at the manufacturing process?
[img]http://per_s.users.photofile.ru/photo/per_s/96374260/xlarge/118566159.jpg[/img]
[img]http://per_s.users.photofile.ru/photo/per_s/96328437/xlarge/115044240.jpg[/img]
[img]http://per_s.users.photofile.ru/photo/per_s/96328437/xlarge/118613733.jpg[/img]
ECU from the Russian car Janvar '5.1 Development of GM. The wiring to it and setting himself doing
[img]http://per_s.users.photofile.ru/photo/per_s/96498974/xlarge/119378547.jpg[/img]
[img]http://per_s.users.photofile.ru/photo/per_s/96498974/xlarge/119361252.jpg[/img]
[img]http://per_s.users.photofile.ru/photo/per_s/96498974/xlarge/119429910.jpg[/img]

exploring the possibility of installing the wheel hub of SILVIA and SKYLINE
2010-09-18 09:40:58
#4
[img]http://per_s.users.photofile.ru/photo/per_s/96516821/xlarge/120245423.jpg[/img]
[img]http://per_s.users.photofile.ru/photo/per_s/96516821/xlarge/120245433.jpg[/img]
[img]http://per_s.users.photofile.ru/photo/per_s/96516821/xlarge/120245428.jpg[/img]
[img]http://per_s.users.photofile.ru/photo/per_s/96516821/xlarge/120239865.jpg[/img]
[img]http://per_s.users.photofile.ru/photo/per_s/96514533/xlarge/120110946.jpg[/img]
2010-09-18 09:54:42
#5
Thankyou for the pictures.

I see a hydraulic (fluid) handbrake ??

[url]http://per_s.users.photofile.ru/photo/per_s/96328437/xlarge/118613733.jpg[/url]

Do you have a picture of the rear differential and rear suspension / under frame ? Thankyou.
2010-09-18 10:02:21
#6
[img]http://per_s.users.photofile.ru/photo/per_s/96328437/xlarge/118709570.jpg[/img]
[img]http://per_s.users.photofile.ru/photo/per_s/96496671/xlarge/119361481.jpg[/img]

This is my logbook in Russian.
Per_s\ïóëÿ Sr-v... ))) Ïîñòðîèë!!! Sr20vet/ìåøàëêà/4wd - NISMO-CLUB .RUSSIA
There are many descriptions and photos.
2010-09-18 10:07:25
#7
I see a hydraulic (fluid) handbrake ??

Yes. Because the rear set ventilated discs 257mm
2010-09-18 10:28:57
#8
Originally Posted by per_s
I see a hydraulic (fluid) handbrake ??

Yes. Because the rear set ventilated discs 257mm


Ahhh i understand. You put fromt brakes at the back.
2010-09-18 10:39:39
#9
Yes.
2010-09-18 11:14:00
#10
Originally Posted by per_s
This is my logbook in Russian.
Per_s\ïóëÿ Sr-v... ))) Ïîñòðîèë!!! Sr20vet/ìåøàëêà/4wd - NISMO-CLUB .RUSSIA
There are many descriptions and photos.


VERY GOOD ! Excellent you take so many pictures. Very helpful.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top