Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Anyone know the measurements to these oem rims?

+ Reply To Thread
Posts: 1-10 of 15
2014-09-24 21:23:22
#1
Anyone know the measurements to these oem rims?
I am looking at all options at this point for 15" rims. Trying to find the cheapest set possible but not look shitty either.
I was thinking factory oem rims but looks as though some of the best looking oem's are the B14's and they still aren't so cheap.
So going away from that unless I luck out.
And found these...




2000 to 2006 Sentra oem rims.
Was wondering if anyone knew the bolt pattern and offset of these?
I am seeing conflicting sizes (widths) on these. Either 15x6 or 15x7?



Also a bit offtopic, but does anyone know if a front strut tower brace that was used on a G20 will fit a Nx?







TIA
2014-09-24 21:50:29
#2
They won't fit, the lug spacing is wrong. You need 4 x 100mm.

2001 Nissan Sentra Rims, 2001 Nissan Sentra Wheels at OriginalWheels.com
2000-2006 Nissan Sentra

Size: 15" x 7", 4 Lug, 4.5" Bolt Pattern
Finish: Silver
Description: Used 5 Spoke Original Alloy Rim
Condition: Like-New

C
2014-09-24 21:53:49
#3
Well crap was afraid they wouldn't since I hadn't seen them mentioned anywhere. But just had to ask.
Thanks Chris

back to the drawing boards
2014-09-25 04:45:32
#4
I don't *think* the p10 or p11 strut tower bar will fit a b13. However, I'm pretty sure the b14 strut brace will work on the b13, all of the front suspension geometry is identical, IIRC. Someone should validate that, but I'm fairly sure. You can find some chinese (reasonable quality) b14 strut braces on ebay:

TC Sportline 95 99 Sentra 200SX Aluminum Front Upper Strut Tower Bar Brace | eBay
2014-10-05 22:21:46
#5
Thanks Will.

Still sorta on topic-
What other vehicles factory oem rims will fit our b13/Nx's?

Could I get years/makes/models?

TIA
2014-10-07 19:52:08
#6
Originally Posted by Will
I don't *think* the p10 or p11 strut tower bar will fit a b13.


It will not fit because there is no strut on the front of a P10 or P11.

EDIT: On most P10 and/or P11. Some people convert the front to struts.
Last edited by Kyle on 2014-10-07 at 20-22-50.
2014-10-19 14:03:13
#7
Re: Anyone know the measurements to these oem rims?
Does anyone happen to know if the 4x100 15x7 Borbet Wheels off a BMW E30 would fit an Nx. Seller doesn't know offset or hub. And too far to drive and do a test fit just to find out.
Would add pics too but can't seem to add pics from phone to forum.
2014-10-19 14:04:37
#8
Does anyone happen to know if the 4x100 15x7 Borbet Wheels off a BMW E30 would fit an Nx. Seller doesn't know offset or hub. And too far to drive and do a test fit just to find out.
Would add pics too but can't seem to add pics from phone to forum.
2014-12-21 22:37:59
#9
Mk2 vw snowflake wheels are 4x100 14x7 I believe correct me if I'm wrong though. They look good imo
2014-12-29 15:40:13
#10
This may help.

http://http://measurespeed.com/index.php

Go down to "Rim Weights" and it will at least tell you sizes and weights, including OEM rims.

Unfortunately, it does not list bolt-pattern nor offset.
Last edited by Shawn B on 2014-12-29 at 16-35-02.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top