Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: P10 poly engine mounts

+ Reply To Thread
Posts: 1-10 of 11
2009-11-22 08:55:32
#1
P10 poly engine mounts
Does any one know if a kit for a B13 will fit a P10 (jdm)? i have searched but found nothing, if not anyone got a listing, part number or link for Poly P10 mounts
Ta
2009-11-22 18:26:42
#2
There aren't any poly mounts for the p10. I believe Subba over on g20.net modded some b13 prothanes to fit, but its better if you ask him. Also, g20.net is currently getting some p10 specific poly mounts made, but it will probably be awhile.
2009-11-22 18:36:05
#3
^ditto
2009-11-23 11:15:22
#4
I ground down a B13 Prothane to fit the crossmember mount nearest the radiator, then filled the void space on other three with 3M Window Weld (urethane in a tube).
2009-12-02 17:20:36
#5
You could mod the B13 ones but you just need to keep buying one the one that is 2 pieces you can put it on the passsenger and rear one
2009-12-09 15:43:27
#6
Just fill them with urethane mix you can buy from mcmastercar.com for $40 shipped or so. Had mine filled since 2003 or so and work great.
2009-12-09 20:41:46
#7
^^ did you use 60A? 80A? or 94A? hows the vibration?
2009-12-09 20:50:52
#8
im using poly to do mines as we speak....
2009-12-09 22:06:08
#9
Originally Posted by burubuduy
^^ did you use 60A? 80A? or 94A? hows the vibration?


I used 90 originally, you can feel it in the car, used 80 on my other g20 more recently and you can feel that just as much. I'd probably stick to a 60 if possible for daily driving.
2010-01-22 00:06:14
#10
i have always used the mcmaster 94A shore in my old b13 and my current p10 and its never given me problems
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top