Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: What numbers to expect??

+ Reply To Thread
Posts: 1-10 of 49
2010-09-22 01:38:02
#1
What numbers to expect??
Hey guys....I was just wondering what numbers to expect on the dyno for my b14 w/ the following mods:

U12 Bluebird SR20det w/ a GTI-R T28 turbo
JWT Z32 4 Bar MAF ECU
JWT S3 cams
Apexi AVC-R and AFC NEO
SARD 550cc side feed injectors
Walbro fuel pump + FPR
Unorthodox pulleys
Apexi N1 3" exhaust
3" downpipe w/ Y pipe
ACT 6 puck clutch, Lightened flywheel
96 G20 LSD cable tranny
HKS Actuator Kit(S14/S15)

Might be taking it down to AMS performance for tuning this week sometime.
2010-09-22 13:42:04
#2
bump
2010-09-22 13:49:23
#3
how much boost?
2010-09-22 13:53:53
#4
You haven't given us a target boost pressure. You just gunna run off the T28 wastegate (8 psi)?

Edit: Damn too slow.
2010-09-22 15:28:01
#5
If you disconnect the line from the wastegate and let it spool as much as it can I'm seeing something like 310whp
2010-09-22 15:31:56
#6
15-17 PSI or so it should knock at 300 whp if not over.


BTW Moving to the turbo section.
2010-09-22 16:20:27
#7
right now its at 10psi....can sr20's handle 15psi on stock internals w/ only s3 cams??
2010-09-22 16:28:40
#8
Originally Posted by 97_200SRX
right now its at 10psi....can sr20's handle 15psi on stock internals w/ only s3 cams??


A stock SR can handle a lot more than what a T-28 can throw at it. It's all in the tuning.
2010-09-22 16:31:04
#9
k...sounds good...i think i'll be taking it down to AMS Performance in Chicago next week to get it tuned....they said that AFC tuning is @ $185/hr
2010-09-22 17:19:16
#10
I made 283whp at 13psi with that setup (except I had S4 cams) but on avenir engine
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top