1600 NX gauge cluster - SR20 Community Forum

LeDevil · 10-02-2008, 06:23 PM

I just bought this less than a week ago and I'm not gonna get around to installing it. I'm selling my car so here it is a 1600 NX digital cluster it has the wiring harness and speedo sensor. Here's the add I got it from I know I probably won't get what I payed for it but I would like 60 + shipping but shoot me a reasonable offer

EDIT: heres the add nx1600 digi cluster

gunnartalon · 10-02-2008, 07:40 PM

Does this fit in a b14?

LeDevil · 10-03-2008, 01:17 AM

I have no idea

SR20s rule · 10-03-2008, 01:54 AM

yeah it does it fits like a charm, drops right into place the only pain is the wiring. since you have a B14. only some of the wire colors will match. the indicator light plugs, will be a breeze to switch over as it says what each wire does on the back of the cluster, but there is the infamous "small black plug" in the middle of the NX cluster. this plug controls the gauges, and the down fall is that it doesnt say what any of these wires do on the cluster, so a wiring diagram would really come in handy when your doing this swap. it took me 12-14 hours to do it in my B13 4dr. and im really good with wiring and electronics. so on a scale of 1-10 I rate this a 7 on the difficulty scale. it takes a lot of patience. but its well worth it and it draws a lot of attention at meets. heres a few pics

LeDevil · 10-03-2008, 02:25 PM

I have a wiring diagram as well for a b13

LeDevil · 10-06-2008, 04:04 AM

Bump still for sale car is gone and this is just taking up space in my garage

gunnartalon · 10-06-2008, 08:10 PM

I want it but I will not have the funds for about a week.

LeDevil · 10-07-2008, 03:56 PM

Well it may still be available lol

dr.fowler · 10-26-2008, 01:53 AM

so the b13 harness will drop this straight in? How much rewiring? Does it require an electronic speed sensor for the trans?

gtswrx · 10-30-2008, 12:51 PM

10-02-2008, 06:23 PM	#1 (permalink)
LeDevil Member Join Date: Sep 2008 Location: Vancouver, Wa iTrader: (1)	1600 NX gauge cluster I just bought this less than a week ago and I'm not gonna get around to installing it. I'm selling my car so here it is a 1600 NX digital cluster it has the wiring harness and speedo sensor. Here's the add I got it from I know I probably won't get what I payed for it but I would like 60 + shipping but shoot me a reasonable offer EDIT: heres the add nx1600 digi cluster Last edited by LeDevil : 10-02-2008 at 06:30 PM.

10-02-2008, 07:40 PM	#2 (permalink)
gunnartalon share some love Join Date: Feb 2008 Location: Reynoldsburg, Ohio iTrader: (0)	Does this fit in a b14? __________________ This isn't where I parked my car. 98 200SX SE-R Performance: 91 Cams, FSB, Prothane Mounts, G20 ECU Cosmetic: Custom Stealth Headlights and Corners, Full Tinted Tails Comfort Features: Remote Start, XM Radio 01 Suzuki Marauder VZ800 Will probably end up killing me one day.

10-03-2008, 01:54 AM	#4 (permalink)
SR20s rule SR20 comin soon!! Join Date: Apr 2008 Location: chicago,IL iTrader: (0)	yeah it does it fits like a charm, drops right into place the only pain is the wiring. since you have a B14. only some of the wire colors will match. the indicator light plugs, will be a breeze to switch over as it says what each wire does on the back of the cluster, but there is the infamous "small black plug" in the middle of the NX cluster. this plug controls the gauges, and the down fall is that it doesnt say what any of these wires do on the cluster, so a wiring diagram would really come in handy when your doing this swap. it took me 12-14 hours to do it in my B13 4dr. and im really good with wiring and electronics. so on a scale of 1-10 I rate this a 7 on the difficulty scale. it takes a lot of patience. but its well worth it and it draws a lot of attention at meets. heres a few pics __________________ '92 B13 4dr XE + Bluebird SR20DET swap, custom log manifold, T3/T4 turbo, FMIC, no exhaust "open downpipe", no A/C, no front bumper reinforcement, battey relocated, NX digital cluster swap, short shifter, B14 lowering springs up front, FSTB, SE-R front and rear seats, SE-R shift boot, SE-R steering wheel, SE-R trunklid, 626 front lip, accord rear lip,custom black housing headlights, 10000K HID headlights, 3000K HID fog lights, autometer gauges,

10-06-2008, 08:10 PM	#7 (permalink)
gunnartalon share some love Join Date: Feb 2008 Location: Reynoldsburg, Ohio iTrader: (0)	I want it but I will not have the funds for about a week. __________________ This isn't where I parked my car. 98 200SX SE-R Performance: 91 Cams, FSB, Prothane Mounts, G20 ECU Cosmetic: Custom Stealth Headlights and Corners, Full Tinted Tails Comfort Features: Remote Start, XM Radio 01 Suzuki Marauder VZ800 Will probably end up killing me one day.

10-26-2008, 01:53 AM	#9 (permalink)
dr.fowler Burning Star IV Join Date: Jan 2008 iTrader: (3)	so the b13 harness will drop this straight in? How much rewiring? Does it require an electronic speed sensor for the trans? __________________ <---- Loves beating up on hapless V8's. Last edited by dr.fowler : 10-26-2008 at 01:57 AM.

10-03-2008, 01:17 AM	#3 (permalink)
LeDevil Member Join Date: Sep 2008 Location: Vancouver, Wa iTrader: (1)	I have no idea

10-03-2008, 02:25 PM	#5 (permalink)
LeDevil Member Join Date: Sep 2008 Location: Vancouver, Wa iTrader: (1)	I have a wiring diagram as well for a b13

10-06-2008, 04:04 AM	#6 (permalink)
LeDevil Member Join Date: Sep 2008 Location: Vancouver, Wa iTrader: (1)	Bump still for sale car is gone and this is just taking up space in my garage

10-07-2008, 03:56 PM	#8 (permalink)
LeDevil Member Join Date: Sep 2008 Location: Vancouver, Wa iTrader: (1)	Well it may still be available lol

10-30-2008, 12:51 PM	#10 (permalink)
gtswrx Member Join Date: Dec 2007 Location: Panama <> Miami iTrader: (1)	PMed __________________ Building turbo.......

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode